100% Original Tzm Molybdenum Rod

Short Description:


Product Detail

Product Tags

Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for 100% Original Tzm Molybdenum Rod, We hope we could have a helpful romantic relationship with businessman from all over the globe.
Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for Molybdenum Rod, Tzm, Tzm Molybdenum Rod, We’ve gained a lot of recognition among customers spread all across the world. They trust us and always give repetitive orders. Furthermore, mentioned below are some of the major factors that have played significant role in our tremendous growth in this domain.
TZM rods
Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo blance balance
Ti 0.40-0.55% 0.40-0.55%
Zr 0.06-0.12% 0.06-0.12%
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 50
W 300 -
C 100-400 100-400
H 10 -
N 10 20
O 500 300
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Diameter (mm) Diameter tolerance (mm)
Ground
0.50-0.99 ±0.007
1.00-1.99 ±0.010
1.00-2.99 ±0.015
3.00-15.9 ±0.020
16.0-24.9 ±0.030
25.0-34.9 ±0.050
35.0-3939 ±0.060
≥40.0 ±0.20
Cleaned
0.50-4.0 ±2.0%
4.10-10.0 ±1.5%
15.0-50.0 ±0.30
51.0-75.0 ±0.40
75.1-120.0 ±1.00
121.0-165.0 ±1.50
Turned
40.0-49.9 ±0.30
50.0-165.0 ±0.40

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-0.99 >500 <2.5 <2.5
1.00-9.90 >300 <2.0 <1.5
10.0-165.0 >100 <1.5 <1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2.0
Diameter >30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±1.0 ±1.5 ±2.5 ±4.0 ±6.0 ±8.0

Density:
1. 0.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground.

Diameter(mm) Tensile strength(MPa) 0.2% Yield Strength(MPa) Elongation(%) Hardness(HV 10)
0.50-4.76 - - - -
4.76-22.20 ≥790 ≥690 ≥18  
22.20-28.60 ≥760 ≥655 ≥15 260-320
28.60-47.60 ≥690 ≥585 ≥10 250-310
47.60-73.00 ≥620 ≥550 ≥10 245-300
73.00-120.9 ≥585 ≥515 ≥5 240-290
121.0-165 ≥585 ≥515 ≥5 220-280

Surface condition:

Surface: Cleaned Ground Turned
  φ0.50-165mm φ0.50-50.00mm φ≥40.00mm
Roughness Diameter (mm) Ra (μm) Ground Ra (μm) Turned
  ≤2.50 ≤0.80 -
2.5-50.0 ≤1.00 -
≥40.0 - ≤3.2

  • Previous:
  • Next:

  • Write your message here and send it to us