2019 China New Design Anti Radiation 1mm Polymer Tungsten Sheet

Short Description:


Product Detail

Product Tags

We support our prospective buyers with ideal top quality merchandise and superior level provider. Becoming the specialist manufacturer in this sector, we have now attained abundant practical expertise in producing and managing for 2019 China New Design Anti Radiation 1mm Polymer Tungsten Sheet, We are going to make increased attempts to aid domestic and international buyers, and generate the mutual benefit and win-win partnership between us. we are eagerly waiting for your sincerely cooperation.
We support our prospective buyers with ideal top quality merchandise and superior level provider. Becoming the specialist manufacturer in this sector, we have now attained abundant practical expertise in producing and managing for Anti Radiation Tungsten, Polymer Tungsten, Tungsten Sheet, Further, we’ve been supported by highly experienced and knowledgeable professionals, who have immense expertise in their respective domain. These professionals work in close coordination with each other to provide our clients an effective range of goods.
Chemical composition:

Main and minor components Min.content(%) ASTM B760
W 99.97 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 15 -
Cu 10 -
Cr 20 -
Fe 30 100
K 10 -
Ni 20 100
Si 20 100
Mo 300 -
C 30 100
H 5 -
N 5 100
O 20 100
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:
Cold rolled sheets

Thickness(mm) Thickness tolerance(±mm)  
Width≤200mm Max.width 510mm Width tolerance(±mm)
0.025 0.003    
0.025-0.03 0.004   0.5
0.03-0.04 0.005   0.5
0.04-0.05 0.006   0.5
0.05-0.06 0.008   0.5
0.06-0.08 0.010   0.5
0.08-0.10 0.015   0.5
0.10-0.15 0.025 0.045 0.5
0.15-0.30 0.035 0.060 1.0
0.30-0.40 0.05 0.085 1.6
0.40-0.50 0.06 0.110 1.6

Hot rooled sheets

Thickness(mm) Thickness tolerance(±mm)  
Width≤510mm Max.width 1200(mm) Width tolerance(±mm)
0.05-0.60 0.110   1.6
0.60-0.80 0.140   2.0
0.08-1.00 0.200   2.0
1.00-2.00 0.250   2.0
2.00-8.00 0.300   2.0
8.0-20.00 5% 5% 2.0

Length tolerance: the length tolerance for all dimensions is maximal +5/-0 mm.
Flatness: max. 4% (measuring procedure on the basis of ASTM B760)
Density: thickness<10.00mm density>19.2g/cm³
thicknes(10.00-20.00mm)density>19.1g/cm³
Vickers hardness:
≤0.10 mm ≥550 HV
0.10-0.05 mm ≥500 HV
0.50-1.50mm ≥470 HV
1.50-10.00mm ≥450 HV
10.00-20.00mm ≥420 HV
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures.
Bed sheet (not trimmed) may have small edge cracks.
Surface quality:
Cold rolled ≤ 0.30mm bright
Cold rolled 0.3-0.5 mm pickled
Hot rolled ≥0.50 mm pickled


  • Previous:
  • Next:

  • Write your message here and send it to us