Cheap price Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods

Short Description:


Product Detail

Product Tags

Our solutions are commonly regarded and trusted by users and can fulfill continuously developing financial and social demands for Cheap price Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods, We sincerely do our best to offer the best service for all the clients and businessmen.
Our solutions are commonly regarded and trusted by users and can fulfill continuously developing financial and social demands for Moly Rod/bar, Titanium Zirconium Molybdenum, Tzm Moly Rod/bar, During the development, our company has built a well-known brand. It is well highly acclaimed by our customers. OEM and ODM are accepted. We are looking forward to customers from all over the world to join us to a wild cooperation.
TZM rods
Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo blance balance
Ti 0.40-0.55% 0.40-0.55%
Zr 0.06-0.12% 0.06-0.12%
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 50
W 300 -
C 100-400 100-400
H 10 -
N 10 20
O 500 300
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Diameter (mm) Diameter tolerance (mm)
Ground
0.50-0.99 ±0.007
1.00-1.99 ±0.010
1.00-2.99 ±0.015
3.00-15.9 ±0.020
16.0-24.9 ±0.030
25.0-34.9 ±0.050
35.0-3939 ±0.060
≥40.0 ±0.20
Cleaned
0.50-4.0 ±2.0%
4.10-10.0 ±1.5%
15.0-50.0 ±0.30
51.0-75.0 ±0.40
75.1-120.0 ±1.00
121.0-165.0 ±1.50
Turned
40.0-49.9 ±0.30
50.0-165.0 ±0.40

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-0.99 >500 <2.5 <2.5
1.00-9.90 >300 <2.0 <1.5
10.0-165.0 >100 <1.5 <1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2.0
Diameter >30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±1.0 ±1.5 ±2.5 ±4.0 ±6.0 ±8.0

Density:
1. 0.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground.

Diameter(mm) Tensile strength(MPa) 0.2% Yield Strength(MPa) Elongation(%) Hardness(HV 10)
0.50-4.76 - - - -
4.76-22.20 ≥790 ≥690 ≥18  
22.20-28.60 ≥760 ≥655 ≥15 260-320
28.60-47.60 ≥690 ≥585 ≥10 250-310
47.60-73.00 ≥620 ≥550 ≥10 245-300
73.00-120.9 ≥585 ≥515 ≥5 240-290
121.0-165 ≥585 ≥515 ≥5 220-280

Surface condition:

Surface: Cleaned Ground Turned
  φ0.50-165mm φ0.50-50.00mm φ≥40.00mm
Roughness Diameter (mm) Ra (μm) Ground Ra (μm) Turned
  ≤2.50 ≤0.80 -
2.5-50.0 ≤1.00 -
≥40.0 - ≤3.2

  • Previous:
  • Next:

  • Write your message here and send it to us