FORGED TUNGSTEN MOLYBDENUM

Products

Mo-Yt Ribbon

Short Description:

Molybdenum ribbon Chemical composition: Main and minor components Min.content(%) Mo Balance Y-Mixoxide 0.47-0.60% Impurities Max.values (μg/g) Al 10 Cu 20 Cr 20 Fe 20 K 20 Ni 10 Si 20 W 300 C 30 H 10 N 10 Cd 5 Hg 1 Pb 5 Dimensions and tolerances: Ribbon Length/Spool: ≥ 50 m / Spool Ribbon Thickness: ≥ 50 g / Spool Ribbon Thickness: 0.015-0.029 mm: +0.002/-0.003mm; 0.030-0.042 mm: +0.003/-0.004mm. Ribbon Width: 1.5-2.99 mm: ±0.10 mm 3.00-4.99mm: ±0.20 m...


Product Detail

Product Tags

Molybdenum ribbon
Chemical composition:

Main and minor components Min.content(%)
Mo Balance
Y-Mixoxide 0.47-0.60%
Impurities Max.values (μg/g)
Al 10
Cu 20
Cr 20
Fe 20
K 20
Ni 10
Si 20
W 300
C 30
H 10
N 10
Cd 5
Hg 1
Pb 5

Dimensions and tolerances:
Ribbon Length/Spool: ≥ 50 m / Spool
Ribbon Thickness: ≥ 50 g / Spool
Ribbon Thickness: 0.015-0.029 mm: +0.002/-0.003mm; 0.030-0.042 mm: +0.003/-0.004mm.
Ribbon Width:
1.5-2.99 mm: ±0.10 mm
3.00-4.99mm: ±0.20 mm
5.0-9.99mm: ±0.30 mm
10.00-20.00mm: ±0.50 mm
Edge Angle α5: <13o
Density: ≥10.1g/cm³
Tensile Strength: 750-1000MPa
Surface condition: The surface is dull and free of oxide layers and impurities that are visible to the naked eye. The final annealing is done in continuous furnaces under ruducing hydrogen atmosphere.
Appearance: The edges are free of defects such as kinks, splits ,ripples, twists or burrs.
Roughness: Ra≥0.15μm
Sagitta: Curvature of ribbon≤2mm/200mm.
Edge line: The fringing to the edge line may not exceed 40 μm to the middline.


  • Previous:
  • Next:

  • Related Products

    
    WhatsApp Online Chat !