Molybdenum rod, high-purity molybdenum rod 99.95%, molybdenum rod for molybdenum electrode, high temperature resistant molybdenum rod

Short Description:


Product Detail

Product Tags

We’re commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for Molybdenum rod, high-purity molybdenum rod 99.95%, molybdenum rod for molybdenum electrode, high temperature resistant molybdenum rod, Our Lab now is “National Lab of diesel engine turbo technology ” , and we own a expert R&D team and complete testing facility.
We’re commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for Molybdenum Electrode, Molybdenum Electrode For Rare Earth Metallurgy, Molybdenum Electrode Rod, We are committed to meet all your needs and solve any technical problems you may encounter with your industrial components. Our exceptional products and vast knowledge of technology makes us the preferred choice for our customers.
Molybdenum rods Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo 99.95 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 100
W 300 -
C 30 100
H 10 20
N 10 70
O 40 -
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Diameter (mm) Diameter tolerance (mm)
Ground
0.50-0.99 ±0.007
1.00-1.99 ±0.010
1.00-2.99 ±0.015
3.00-15.9 ±0.020
16.0-24.9 ±0.030
25.0-34.9 ±0.050
35.0-3939 ±0.060
≥40.0 ±0.20
Cleaned
0.50-4.0 ±2.0%
4.10-10.0 ±1.5%
15.0-50.0 ±0.30
51.0-75.0 ±0.40
75.1-120.0 ±1.00
121.0-165.0 ±1.50
Turned
40.0-49.9 ±0.30
50.0-165.0 ±0.40

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-0.99 >500 <2.5 <2.5
1.00-9.90 >300 <2.0 <1.5
10.0-165.0 >100 <1.5 <1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2.0
Diameter >30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±1.0 ±1.5 ±2.5 ±4.0 ±6.0 ±8.0

Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm) Tensile strength(MPa) 0.2% Yield Strength(MPa) Elongation(%) Hardness(HV 10)
0.50-3.18 ≥585 ≥450 ≥15  
3.18-10.30 ≥515 ≥380 ≥15  
10.32-22.20 ≥620 ≥515 ≥18 230-280
22.20-28.60 ≥585 ≥480 ≥15 225-270
28.60-47.60 ≥515 ≥450 ≥10 215-260
47.60-73.00 ≥480 ≥415 ≥10 210-250
73.00-88.90 ≥450 ≥380 ≥10 205-240
89.00-120.9 ≥450 ≥380 ≥5 200-240
121.0-164.9 ≥450 ≥380 ≥5 180-240
165.0 ≥450 ≥380 ≥- 180-240

Surface condition:

Surface: Cleaned Ground Turned
  φ0.50-165mm φ0.50-50.00mm φ≥40.00mm
Roughness Diameter (mm) Ra (μm) Ground Ra (μm) Turned
  ≤2.50 ≤0.80 -
2.5-50.0 ≤1.00 -
≥40.0 - ≤3.2

  • Previous:
  • Next:

  • Write your message here and send it to us