New Delivery for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods
Our primary objective is always to offer our clients a serious and responsible small business relationship, offering personalized attention to all of them for New Delivery for Tzm Moly Rod/bar Molybdenum And Zirconium-titanium Alloy Rods, Our items have exported to North America, Europe, Japan, Korea, Australia, New Zealand, Russia and other countries. Wanting forward to build up a very good and long-term cooperation along with you in coming long run!
Our primary objective is always to offer our clients a serious and responsible small business relationship, offering personalized attention to all of them for Moly Rod/bar, Titanium Zirconium Molybdenum, Tzm Moly Rod/bar, Since always, we adhering to the “open and fair, share to get, the pursuit of excellence, and creation of value”values, adhere to the”integrity and efficient, trade-oriented, best way , best valve” business philosophy. Together with our all over the world have branches and partners to develop new business areas, maximum common values. We sincerely welcome and together we share in global resources, opening up new career together with the chapter.
Molybdenum rods Chemical composition:
| Main and minor components | Min.content(%) | ASTM B386 (361) |
| Mo | 99.95 | balance |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 10 | - |
| Cu | 20 | - |
| Cr | 20 | - |
| Fe | 20 | 100 |
| K | 20 | - |
| Ni | 10 | 50 |
| Si | 20 | 100 |
| W | 300 | - |
| C | 30 | 100 |
| H | 10 | 20 |
| N | 10 | 70 |
| O | 40 | - |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
| Diameter (mm) | Diameter tolerance (mm) |
| Ground | |
| 0.50-0.99 | ±0.007 |
| 1.00-1.99 | ±0.010 |
| 1.00-2.99 | ±0.015 |
| 3.00-15.9 | ±0.020 |
| 16.0-24.9 | ±0.030 |
| 25.0-34.9 | ±0.050 |
| 35.0-3939 | ±0.060 |
| ≥40.0 | ±0.20 |
| Cleaned | |
| 0.50-4.0 | ±2.0% |
| 4.10-10.0 | ±1.5% |
| 15.0-50.0 | ±0.30 |
| 51.0-75.0 | ±0.40 |
| 75.1-120.0 | ±1.00 |
| 121.0-165.0 | ±1.50 |
| Turned | |
| 40.0-49.9 | ±0.30 |
| 50.0-165.0 | ±0.40 |
Length and straightness:
| Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
| Cleaned | Ground/turned | ||
| 0.50-0.99 | ＞500 | ＜2.5 | ＜2.5 |
| 1.00-9.90 | ＞300 | ＜2.0 | ＜1.5 |
| 10.0-165.0 | ＞100 | ＜1.5 | ＜1.0 |
Length tolerance:
| Diameter 0.50-30.0 mm | ||||||
| Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2.0 |
| Diameter ＞30.0 mm | ||||||
| Nominal length (mm) | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±1.0 | ±1.5 | ±2.5 | ±4.0 | ±6.0 | ±8.0 |
Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
| Diameter(mm) | Tensile strength(MPa) | 0.2% Yield Strength(MPa) | Elongation(%) | Hardness(HV 10) |
| 0.50-3.18 | ≥585 | ≥450 | ≥15 | |
| 3.18-10.30 | ≥515 | ≥380 | ≥15 | |
| 10.32-22.20 | ≥620 | ≥515 | ≥18 | 230-280 |
| 22.20-28.60 | ≥585 | ≥480 | ≥15 | 225-270 |
| 28.60-47.60 | ≥515 | ≥450 | ≥10 | 215-260 |
| 47.60-73.00 | ≥480 | ≥415 | ≥10 | 210-250 |
| 73.00-88.90 | ≥450 | ≥380 | ≥10 | 205-240 |
| 89.00-120.9 | ≥450 | ≥380 | ≥5 | 200-240 |
| 121.0-164.9 | ≥450 | ≥380 | ≥5 | 180-240 |
| 165.0 | ≥450 | ≥380 | ≥- | 180-240 |
Surface condition:
| Surface： | Cleaned | Ground | Turned |
| φ0.50-165mm | φ0.50-50.00mm | φ≥40.00mm | |
| Roughness | Diameter (mm) | Ra (μm) Ground | Ra (μm) Turned |
| ≤2.50 | ≤0.80 | - | |
| 2.5-50.0 | ≤1.00 | - | |
| ≥40.0 | - | ≤3.2 |
