OEM Factory for Ground Molybdenum Alloy Tzm Plate/sheet

Short Description:


Product Detail

Product Tags

We persist with our business spirit of “Quality, Effectiveness, Innovation and Integrity”. We aim to create a lot more value for our consumers with our wealthy resources, sophisticated machinery, experienced workers and outstanding providers for OEM Factory for Ground Molybdenum Alloy Tzm Plate/sheet, Welcome all nice customers communicate details of products and solutions and ideas with us!!
We persist with our business spirit of “Quality, Effectiveness, Innovation and Integrity”. We aim to create a lot more value for our consumers with our wealthy resources, sophisticated machinery, experienced workers and outstanding providers for Molybdenum Alloy Tzm Plate, Tzm Plate, Tzm Sheet, Aiming to grow to be by far the most expert supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Thorough data can be obtained in our web page and you’ll be served with good quality consultant service by our after-sale team. They’re intending to let you to get complete acknowledge about our objects and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo Balance balance
Ti 0.40-0.55% 0.40-0.55%
Zr 0.06-0.12% 0.06-0.12%
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 100
W 300 -
C 100-400 100-400-
H 10 -
N 10 20
O 500 300
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Cold rolled sheets
Thickness(mm) Thickness tolerace(±mm) Maximal width(mm) Width tolerace(±mm)
0.30-0.50 0.028 300 1.0
Hot rolled sheets
Thickness(mm) Thickness tolerace(±mm) Maximal width(mm) Width tolerace(±mm)
0.50-0.60 0.06 850 1.6
0.60-1.00 0.08 850 1.6
1.00-1.50 0.13 850 2.0
1.50-2.00 0.15 850 2.0
2.00-3.60 0.18 850 2.0
3.60-50.0 5% 1000 2.0

Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:

Thickness (mm) Tensile StrengthMin. (MPa) 0.2% Yield strengtMin.(MPa) ElongationMin.(%)
0.30-1.00 700 600 5
1.00-2.50 700 600 10
2.50-5.00 700 600 12
5.00-20.00 650 600 10
20.00-50.00 550 470 5

Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.


  • Previous:
  • Next:

  • Write your message here and send it to us