OEM/ODM Factory Astm B386 Molybdenum Lanthanum Mola Alloy Plate Sheet

Short Description:


Product Detail

Product Tags

“Quality very first, Honesty as base, Sincere assistance and mutual profit” is our idea, in an effort to create consistently and pursue the excellence for OEM/ODM Factory Astm B386 Molybdenum Lanthanum Mola Alloy Plate Sheet, We have been keeping chasing WIN-WIN problem with our purchasers. We warmly welcome consumers from everywhere in the planet coming in excess of for a visit and establishing long-term connection.
“Quality very first, Honesty as base, Sincere assistance and mutual profit” is our idea, in an effort to create consistently and pursue the excellence for Astm B386 Mola Alloy Plate Sheet, Astm B386 Molybdenum Lanthanum Mola Alloy Plate Sheet, Molybdenum Lanthanum Plate Sheet, we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets

Thickness(mm) Thickness tolerance(±mm) Max.width(mm) Width tolerance(±mm)
0.10 0.008 305 0.5
0.10-0.127 0.010 305 0.5
0.127-0.15 0.010 610 0.5
0.15-0.25 0.015 800 0.5
0.25-0.50 0.020 915 1.6
0.50-0.80 0.028 915 1.6
0.80-1.20 0.035 915 1.6
1.20-2.00 3% 915 1.6

Cold rooled sheets

Thickness(mm) Thickness tolerance(±mm) Max.width(mm) Width tolerance(±mm)
1.00 0.080 850 2.0
1.00-1.50 0.130 850 2.0
1.50-2.00 0.150 850 2.0
2.00-3.60 0.180 1200 2.0
3.60-50.00 5% 1500 2.0

Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness<0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: >200 HV
Tensile test:

Thickness(mm) Tensile Srenght Min. (MPa) 0.2 % Yield strength Min. (MPa) ElongationMin.(%)
0.1-0.25 700 620 2.0
0.25-0.40 680 590 3.0
0.40-0.65 680 590 5.0
0.65-1.50 680 580 10.0
1.50-2.30 640 580 12.0
2.30-5.00 640 580 15.0
5.00-10.00 640 580 10.0
10.00-13.00 590 540 10.0
13.00-25.00 500 480 2.0
25.00-50.00 500 480 1.0

Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo 99.97 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 100
W 300 -
C 30 100
H 10 20
N 10 70
O 40 -
Cd 5 -
Hg 1 -
Pb 5 -

  • Previous:
  • Next:

  • Write your message here and send it to us