China Supply ODM Molybdenum Tzm Moly Rod/bar For Furnace Manufacturer and Supplier

Supply ODM Molybdenum Tzm Moly Rod/bar For Furnace

Short Description:

Product Detail

Product Tags

The consumer gratification is our primary concentrate on. We uphold a consistent level of professionalism, top quality, credibility and repair for Supply ODM Molybdenum Tzm Moly Rod/bar For Furnace, We welcome new and previous shoppers from all walks of existence to contact us for long term organization relationships and acquiring mutual success!
The consumer gratification is our primary concentrate on. We uphold a consistent level of professionalism, top quality, credibility and repair for Pure Molybdenum Tzm Moly Rod/bar For Furnace, Tzm Moly Bar, Tzm Moly Rod, You can always find the products and solutions you need to have in our company! Welcome to inquire us about our product and anything we know and we can help in auto spare parts. We’re looking forward to work with you for a win-win situation.
TZM rods
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	blance	balance
Ti	0.40-0.55%	0.40-0.55%
Zr	0.06-0.12%	0.06-0.12%
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	50
W	300	-
C	100-400	100-400
H	10	-
N	10	20
O	500	300
Cd	5	-
Hg	1	-
Pb	5	-

Dimensions and tolerances:

Diameter (mm)	Diameter tolerance (mm)
Ground
0.50-0.99	±0.007
1.00-1.99	±0.010
1.00-2.99	±0.015
3.00-15.9	±0.020
16.0-24.9	±0.030
25.0-34.9	±0.050
35.0-3939	±0.060
≥40.0	±0.20
Cleaned
0.50-4.0	±2.0%
4.10-10.0	±1.5%
15.0-50.0	±0.30
51.0-75.0	±0.40
75.1-120.0	±1.00
121.0-165.0	±1.50
Turned
40.0-49.9	±0.30
50.0-165.0	±0.40

Length and straightness:

Diameter (mm)	Production length (mm)	Stiraightness/Meter (mm)
Diameter (mm)	Production length (mm)	Cleaned	Ground/turned
0.50-0.99	＞500	＜2.5	＜2.5
1.00-9.90	＞300	＜2.0	＜1.5
10.0-165.0	＞100	＜1.5	＜1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.2	±0.3	±0.5	±0.8	±1.2	±2.0
Diameter ＞30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±1.0	±1.5	±2.5	±4.0	±6.0	±8.0

Density:
1. 0.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground.

Diameter(mm)	Tensile strength(MPa)	0.2% Yield Strength(MPa)	Elongation(%)	Hardness(HV 10)
0.50-4.76	-	-	-	-
4.76-22.20	≥790	≥690	≥18
22.20-28.60	≥760	≥655	≥15	260-320
28.60-47.60	≥690	≥585	≥10	250-310
47.60-73.00	≥620	≥550	≥10	245-300
73.00-120.9	≥585	≥515	≥5	240-290
121.0-165	≥585	≥515	≥5	220-280

Surface condition:

Surface：	Cleaned	Ground	Turned
	φ0.50-165mm	φ0.50-50.00mm	φ≥40.00mm
Roughness	Diameter (mm)	Ra (μm) Ground	Ra (μm) Turned
	≤2.50	≤0.80	-
	2.5-50.0	≤1.00	-
	≥40.0	-	≤3.2