Trending Products Molybdenum Sheet

Short Description:


Product Detail

Product Tags

Our staff are usually in the spirit of “continuous improvement and excellence”, and while using the top-quality high-quality items, favorable value and superior after-sales services, we try to acquire each and every customer’s belief for Trending Products Molybdenum Sheet, We have ISO 9001 Certification and qualified this product or service .in excess of 16 years experiences in manufacturing and designing, so our goods featured with very best high-quality and aggressive rate. Welcome cooperation with us!
Our staff are usually in the spirit of “continuous improvement and excellence”, and while using the top-quality high-quality items, favorable value and superior after-sales services, we try to acquire each and every customer’s belief for Molybdenum Sheet, Molybdenum Sheet Furnace, Polished Molybdenum Sheet, Certainly, competitive price, suitable package and timely delivery will be assured as per customers’ demands. We sincerely hope to build business relationship with you on the basis of mutual benefit and profit in the very near future. Warmly welcome to contact us and become our direct cooperators.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets

Thickness(mm) Thickness tolerance(±mm) Max.width(mm) Width tolerance(±mm)
0.10 0.008 305 0.5
0.10-0.127 0.010 305 0.5
0.127-0.15 0.010 610 0.5
0.15-0.25 0.015 800 0.5
0.25-0.50 0.020 915 1.6
0.50-0.80 0.028 915 1.6
0.80-1.20 0.035 915 1.6
1.20-2.00 3% 915 1.6

Cold rooled sheets

Thickness(mm) Thickness tolerance(±mm) Max.width(mm) Width tolerance(±mm)
1.00 0.080 850 2.0
1.00-1.50 0.130 850 2.0
1.50-2.00 0.150 850 2.0
2.00-3.60 0.180 1200 2.0
3.60-50.00 5% 1500 2.0

Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness<0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: >200 HV
Tensile test:

Thickness(mm) Tensile Srenght Min. (MPa) 0.2 % Yield strength Min. (MPa) ElongationMin.(%)
0.1-0.25 700 620 2.0
0.25-0.40 680 590 3.0
0.40-0.65 680 590 5.0
0.65-1.50 680 580 10.0
1.50-2.30 640 580 12.0
2.30-5.00 640 580 15.0
5.00-10.00 640 580 10.0
10.00-13.00 590 540 10.0
13.00-25.00 500 480 2.0
25.00-50.00 500 480 1.0

Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo 99.97 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 100
W 300 -
C 30 100
H 10 20
N 10 70
O 40 -
Cd 5 -
Hg 1 -
Pb 5 -

  • Previous:
  • Next:

  • Write your message here and send it to us