Wholesale Price Low Cost Tungsten Carbide Rods / Bars / Strips

Short Description:


Product Detail

Product Tags

The key to our success is “Good Product or service High quality, Reasonable Rate and Efficient Service” for Wholesale Price Low Cost Tungsten Carbide Rods / Bars / Strips, We invitations you and your company to prosper along with us and share a vibrant long term in worldwide current market.
The key to our success is “Good Product or service High quality, Reasonable Rate and Efficient Service” for Tungsten Carbide Bars, Tungsten Carbide Rods, Tungsten Carbide Strips, We’ve got a excellent team supplying experienced service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We’ve been sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy with you. We also warmly welcome customers to visit our company and purchase our products.
Chemical composition:

Main and minor components Min.content(%) ASTM B760
W 99.95 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 15 -
Cu 10 -
Cr 20 -
Fe 30 100
K 10 -
Ni 20 100
Si 20 100
Mo 100 -
C 30 100
H 5 -
N 5 100
O 20 100
Cd 5 -
Hg 1 -
Pb 5 -

Diameter and tolerances:

Diameter (mm) Tolerance
  Straightened Forged Turned Ground
0.50-0.99 - -   ±0.007
1.00-1.99 - -   ±0.010
2.00-2.99 ±2.0 % -   ±0.015
3.00-15.9 - -   ±0.020
16.0-24.9 - ±0.30   ±0.030
25.0-34.9 - ±0.40   ±0.050
35.0-39.9 - ±0.40 ±0.30 ±0.060
40.0-49.9 - ±0.40 ±0.30 ±0.20
50.0-90.0 - ±1.00 ±0.40 -

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-10.0 ≥500 <2.5 <2.5
10.1-50.0 ≥300 <2.0 <1.5
50.1-90.0 ≥100 <2.0 <1.5

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) ≥15 15-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±2.0 ±3.0 ±4.0
Diameter >30.0 mm
Nominal length (mm) ≥30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.5 ±0.8 ±1.2 ±4.0 ±6.0 ±8.0

Density: ≥19.1g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm) Hardness (HV 10)
0.50-2.99
3.00-9.99 420-500
10.0-29.9 420-480
30.0-49.9 380-460
≥50 >350

Surface condition:

Diameter (mm) Surface condition
0.50-90.0 Chemical cleaned
≥40.0 Turned Ra ≤3.2μm
0.50-30 Centerless ground Ra≤1.0μm
≥40.0 - Centerless ground Ra≤1.2μm

  • Previous:
  • Next:

  • Write your message here and send it to us