Electropolishing molybdenum Waea.
Hanganga matū:
| Nga waahanga matua me nga waahanga iti | Min.ihirangi(%) |
| Mo | 99.97 |
| Nga poke | Ngā uara mōrahi (μg/g) |
| Al | 10 |
| Cu | 20 |
| Cr | 20 |
| Fe | 20 |
| K | 20 |
| Ni | 10 |
| Si | 20 |
| W | 300 |
| C | 30 |
| H | 10 |
| N | 10 |
| O | 40 |
| Cd | 5 |
| Hg | 1 |
| Pb | 5 |
Te rahi me te whakaahuru:
| Diamita(mm) | φ-Whakaaetanga (%) | Te uara nui kei waho o te porowhita |
| 0.30-0.79 | ±2.0 | I rotoφ-Toleance |
| 0.80-1.49 | ±1.5 | 0.010 mm |
| 1.50-3.99 | ±1.0 | 0.025 mm |
| 4.00-10.0 | ±1.0 | 0.050 mm |
Āhuatanga hua tinana me te miihini:
| Diamita (mm) | Te kaha o te kaha (MPa) |
| 0.30-0.49 | 1000-1300 |
| 0.50-0.79 | 800-1200 |
| 0.80-1.49 | 750-1100 |
| 1.50-3.99 | 650-1000 |
| 4.00-10.0 | ＞600 |
Whakaroa: ≥10%
Kiato: 10.2g/cm³
Nga whakamatautau kore kino: 100% Eddy whakamatautau o naianei, wehe uara max.0.5 %
Mata:
1.0.30-1.00mm Te Hiko (mata kanapa)
2.0.30-1.00mm Kua horoia matū (mata puhoi whakarewa)
Tuhia to korero ki konei ka tukuna mai ki a matou
