Molamu oa China oa tungsten bar o hloekileng oa 99.95% o nang le density e phahameng Moetsi le Mofani

Molamu oa tungsten oa bar ea tungsten e hloekileng ea 99.95% e nang le khatello e phahameng

Tlhaloso e Khutšoanyane:

Lithupa tsa tungsten ke likotoana tse telele, tse silindara tsa tšepe e hloekileng ea tungsten tse nkoang e le tsa bohlokoa ka lebaka la ntlha ea tsona e phahameng ea ho qhibiliha, ho teteana le ho thatafala. Ke mofuta oa motheo oa tungsten o sebelisoang e le thepa e tala bakeng sa ho etsa lihlahisoa tse ling le e le likarolo tse felileng lits'ebetsong tse boima.

Romella imeile ho rona Khoasolla e le PDF

Qaqiso ea Sehlahisoa

Li-tag tsa Sehlahisoa

Litlhaloso tsa Sehlahisoa

Lithupa tsa tungsten ke likarolo tsa tšepe tse teteaneng haholo, tse nang le ntlha e phahameng haholo ea ho qhibiliha (3422℃) tse tsejoang ka matla a phahameng, ho hanyetsa mafome, le ho tsamaisa motlakase/mocheso. Lithupa tsena li sebelisoa haholo-holo ho tjheseletsa (TIG), lifofaneng le lits'ebetsong tsa sebōpi sa mocheso o phahameng, lithupa tsena li fumaneha ka mefuta e hloekileng (99.95%+) kapa e kopantsoeng (mohlala, e nang le lanthanated, e nang le thoriated).

Litlhaloso tsa Sehlahisoa

Litekanyo	Ho iketsetsa lintho tsa hau
Sebaka sa Tšimoloho	Luoyang, Henan
Lebitso la Letšoao	FGD
Kopo	Indasteri ea Metallurgical
Sebopeho	Jwalo ka tlhoko ya hao
Bokaholimo	Jwalo ka tlhoko ya hao
Bohloeki	99.95%
Thepa	W1
Botenya	19.3g/cm3
Lintlha tse ikhethang	ho qhibiliha ho hoholo
Ho paka	Nyeoe ea Lehong

Sebopeho sa Lik'hemik'hale

Bolelele le ho otloloha

Likarolo tse ka sehloohong	Bophahamo ba ＞99.95%
Dikahare tsa ho se hlweke ≤
Pb	0.0005
Fe	0.0020
S	0.0050
P	0.0005
C	0.01
Cr	0.0010
Al	0.0015
Cu	0.0015
K	0.0080
N	0.003
Sn	0.0015
Si	0.0020
Ca	0.0015
Na	0.0020
O	0.008
Ti	0.0010
Mg	0.0010

Bophara (mm)	Bolelele ba tlhahiso (mm)	Ho otloloha/Methara (mm)
0.50-10.0	≥500	E hloekisitsoe	Fatše/e retolohile
10.1-50.0	≥300	2.5	2.5
50.1-90.0	≥100	2.0	1.5
		2.0	1.5

Bophara le mamello

Ho mamella bolelele

Bophara (mm)	Mamello
	E otlolohile	E entsoe	E retolohile	Fatše
0.50-0.99	-	-	-	± 0.007
1.00-1.99	-	-	-	± 0.010
2.00-2.99	± 2.0%	-	-	± 0.015
3.00-15.9	-	-	-	± 0.020
16.0-24.9	-	± 0.30	-	± 0.030
25.0-34.9	-	± 0.40	-	± 0.050
35.0-39.9	-	± 0.40	± 0.30	± 0.060
40.0-49.9	-	± 0.40	± 0.30	± 0.20
50.0-90.0	-	±1.00	± 0.40	-

Bophara 0.50-30.0 mm
Bolelele bo tloaelehileng (mm)	≥15	15-120	120-400	400-1000	1000-2000	＞2000
Bolelele ba mamello (mm)	± 0.2	± 0.3	± 0.5	± 2.0	±3.0	± 4.0
Bophara ＞30.0 mm
Bolelele bo tloaelehileng (mm)	≥30	30-120	120-400	400-1000	1000-2000	＞2000
Bolelele ba mamello (mm)	± 0.5	± 0.8	± 1.2	± 4.0	± 6.0	± 8.0

Hobaneng re Khetha

1. Feme ea rona e Motseng oa Luoyang, Profinseng ea Henan. Luoyang ke sebaka sa tlhahiso bakeng sa merafo ea tungsten le molybdenum, kahoo re na le melemo e felletseng ea boleng le theko;

2. Khamphani ea rona e na le basebetsi ba tekheniki ba nang le boiphihlelo ba lilemo tse fetang 15, 'me re fana ka litharollo le litlhahiso tse reriloeng bakeng sa litlhoko tsa moreki e mong le e mong.

3. Lihlahisoa tsohle tsa rona li hlahlojoa ka thata pele li romeloa kantle ho naha.

4. Haeba o fumana thepa e nang le sekoli, o ka ikopanya le rona bakeng sa puseletso.

Phallo ea Tlhahiso

1. Tokisetso ea thepa

(Phofo e khethiloeng ea tungsten e hloekileng haholo)

2. Ho fofonela

(Kenya phofo ea tungsten ka sebōping sa ho qhibiliha bakeng sa ho qhibiliha ha mocheso o phahameng)

3. Ho tšela

(Tšela mokelikeli oa tungsten o qhibilihisitsoeng ka har'a hlobo e lokisitsoeng esale pele 'me u e tlohele e pholile le ho tiea)

4. Kalafo ea mocheso

(Kalafo ea mocheso oa thupa ea tungsten ka ho futhumatsa le ho pholisa)

5. Kalafo ea bokaholimo

(Ho kenyeletsoa ho seha, ho sila, ho bentša le lits'ebetso tse ling)

Likopo

Diforase tsa Mocheso o Phahameng le Sefofane: Dithupa tsa tungsten di loketse dikarolo tse ka hara diforase tsa mocheso o phahameng, tse kang dielemente tse futhumatsang le tse tshehetsang, le ka hara dinotlolo tsa rokete, moo di lokelang ho mamella mocheso o matla ntle le ho fetoha sebopeho.

Motlakase le Elektroniki: Ho tsamaisa motlakase hantle ha yona le ntlha e phahameng ya ho qhibiliha ho e etsa hore e be thepa ya bohlokwa bakeng sa dikgokelo tsa motlakase, di-electrode tsa mabone a ntshang motlakase, di-anode tse ka hara di-tube tsa X-ray, le di-electrode tsa ho tjheseletsa tsa TIG (Tungsten Inert Gas).

Bongaka le Liindasteri: U tla fumana lithupa tsa tungsten tse sireletsang mahlaseli bakeng sa lisebelisoa tsa bongaka ka lebaka la ho teteana ha tsona, le lisebelisoa tse khethehileng tsa ho cheka bakeng sa ho etsa masoba a manyane, a nepahetseng.

Dikoloi le Tlhahiso: Di ka fumanwa dikarolong tse thata jwalo ka di-crankshaft tsa dikoloi tse tswetseng pele le e le thepa ya motheo bakeng sa ho hlahisa terata ya tungsten le dikarolo tse ding tse nepahetseng.

Lisetifikeiti

Setšoantšo sa Thomello

Lipotso Tse Botsoang Khafetsa

Mabaka a ho kobeha ha thupa ea tungsten ka mor'a ho cha ke afe?

1. Kgatelelo ya mocheso: Ha thupa ya tungsten e futhumatswa ho fihlela dithempereichara tse phahameng, e angwa ke kgatelelo ya mocheso, e leng se ka etsang hore e kobehe kapa e kobehe. Sena se ka etsahala haeba thupa e sa tshehetswa hantle kapa e fetoha ka potlako mochesong.

2. Mokhathala oa thepa: Lithupa tsa tungsten li tla ba le mokhathala oa thepa ka mor'a ho sebelisoa mochesong o phahameng ka nako e telele. Sena se ka etsa hore thepa e fokole, e leng se etsang hore ho be bonolo ho kobeha kapa ho kobeha.

3. Ho phodisa ho sa lekaneng: Haeba thupa ya tungsten e sa phodiswa hantle kamora ho e sebedisa, mocheso o ka bolokwa mme wa tswela pele ho senyeha nakong ya tshebetso ya ho phodisa, e leng se fellang ka ho kobeha.

4. Tšenyo ea mechine: Haeba thupa ea tungsten e ka ba tlas'a khatello ea mechine kapa tšusumetso nakong ea tšebeliso, ho ka hlaha mapetso a manyane kapa tšenyo e 'ngoe ea sebopeho, e leng se ka fellang ka ho kobeha ka mor'a ho cha.

Litlhokomelo tsa ho sebelisa lithupa tsa tungsten ke life?

1. Khetha thupa e loketseng ea tungsten
Khetha thepa le litlhaloso tse loketseng ha o sebelisa lithupa tsa tungsten. Maemo a fapaneng a ts'ebeliso a hloka tšebeliso ea litlhaloso le bolelele bo fapaneng ba lithupa tsa tungsten.
2. Laola mocheso o futhumatsang
Ha ho futhumatsoa lithupa tsa tungsten, ho bohlokoa ho laola mocheso le ho ela hloko nako ea ho futhumatsa ho qoba mocheso o phahameng haholo kapa linako tse telele tsa ho futhumatsa.
3. Qoba ho otlolla ho feteletseng
Ha ho sebediswa dithupa tsa tungsten, ho otlolla ho feteletseng ho lokela ho qojwa, mme ho ka nahanelwa ka ho fetola mokgwa wa ho tjheseletsa kapa mekgwa e meng ya ho sebetsana le tsona.