Super Lowest Price Tungsten Nuts - IOS Certificate Purity Mo1 Molybdenum Plate And Sheet – Forged Tungsten
Super Lowest Price Tungsten Nuts - IOS Certificate Purity Mo1 Molybdenum Plate And Sheet – Forged Tungsten Detail:
With this motto in mind, we’ve got become among essentially the most technologically innovative, cost-efficient, and price-competitive manufacturers for IOS Certificate Purity Mo1 Molybdenum Plate And Sheet, Sincerely hope we’re increasing up along with our buyers all around the entire world.
With this motto in mind, we’ve got become among essentially the most technologically innovative, cost-efficient, and price-competitive manufacturers for Mo1, Molybdenum Plate, Molybdenum Plate And Sheet, In order to make more people know our merchandise and to enlarge our market, we’ve devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets
Thickness(mm) | Thickness tolerance(±mm) | Max.width(mm) | Width tolerance(±mm) |
0.10 | 0.008 | 305 | 0.5 |
0.10-0.127 | 0.010 | 305 | 0.5 |
0.127-0.15 | 0.010 | 610 | 0.5 |
0.15-0.25 | 0.015 | 800 | 0.5 |
0.25-0.50 | 0.020 | 915 | 1.6 |
0.50-0.80 | 0.028 | 915 | 1.6 |
0.80-1.20 | 0.035 | 915 | 1.6 |
1.20-2.00 | 3% | 915 | 1.6 |
Cold rooled sheets
Thickness(mm) | Thickness tolerance(±mm) | Max.width(mm) | Width tolerance(±mm) |
1.00 | 0.080 | 850 | 2.0 |
1.00-1.50 | 0.130 | 850 | 2.0 |
1.50-2.00 | 0.150 | 850 | 2.0 |
2.00-3.60 | 0.180 | 1200 | 2.0 |
3.60-50.00 | 5% | 1500 | 2.0 |
Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness<0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: >200 HV
Tensile test:
Thickness(mm) | Tensile Srenght Min. (MPa) | 0.2 % Yield strength Min. (MPa) | ElongationMin.(%) |
0.1-0.25 | 700 | 620 | 2.0 |
0.25-0.40 | 680 | 590 | 3.0 |
0.40-0.65 | 680 | 590 | 5.0 |
0.65-1.50 | 680 | 580 | 10.0 |
1.50-2.30 | 640 | 580 | 12.0 |
2.30-5.00 | 640 | 580 | 15.0 |
5.00-10.00 | 640 | 580 | 10.0 |
10.00-13.00 | 590 | 540 | 10.0 |
13.00-25.00 | 500 | 480 | 2.0 |
25.00-50.00 | 500 | 480 | 1.0 |
Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | 99.97 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 30 | 100 |
H | 10 | 20 |
N | 10 | 70 |
O | 40 | - |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Product detail pictures:
Related Product Guide:
Delivery of carbon, nitrogen, and sulfur to the silicate Earth by a giant impact | Niobium Carbide Alloy Powder
Scalable two-dimensional materials advance future-gen electronics — ScienceDaily | Niobium Carbide Alloy Powder
The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Super Lowest Price Tungsten Nuts - IOS Certificate Purity Mo1 Molybdenum Plate And Sheet – Forged Tungsten , The product will supply to all over the world, such as: Belarus , Netherlands , Leicester , Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
By Elizabeth from Latvia - 2017.11.11 11:41
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Hellyngton Sato from Lithuania - 2018.03.03 13:09