Cheap PriceList for Tungsten Carbide Rods With Double Helical Holes 30(r),Cemented Carbide Rod With Two Helix Holes
We always get the job done being a tangible team to make certain that we can easily give you the very best high quality and the most effective rate for Cheap PriceList for Tungsten Carbide Rods With Double Helical Holes 30(r),Cemented Carbide Rod With Two Helix Holes, We have been on the lookout forward to creating cooperative associations with you. Be sure to speak to us for additional data.
We always get the job done being a tangible team to make certain that we can easily give you the very best high quality and the most effective rate for Cemented Carbide Rod, Threaded Rod With Hole, Yl10.2 Tungsten Carbide Welding Rod, Our staffs are adhering to the “Integrity-based and Interactive Development” spirit, and the tenet of “First-class Quality with Excellent Service”. According to the needs of every customer, we provide customized & personalized services to help customers achieve their goals successfully. Welcome clients from home and abroad to call and inquire!
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B760 |
| W | 99.95 | balance |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 15 | - |
| Cu | 10 | - |
| Cr | 20 | - |
| Fe | 30 | 100 |
| K | 10 | - |
| Ni | 20 | 100 |
| Si | 20 | 100 |
| Mo | 100 | - |
| C | 30 | 100 |
| H | 5 | - |
| N | 5 | 100 |
| O | 20 | 100 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Diameter and tolerances:
| Diameter (mm) | Tolerance | |||
| Straightened | Forged | Turned | Ground | |
| 0.50-0.99 | - | - | ±0.007 | |
| 1.00-1.99 | - | - | ±0.010 | |
| 2.00-2.99 | ±2.0 % | - | ±0.015 | |
| 3.00-15.9 | - | - | ±0.020 | |
| 16.0-24.9 | - | ±0.30 | ±0.030 | |
| 25.0-34.9 | - | ±0.40 | ±0.050 | |
| 35.0-39.9 | - | ±0.40 | ±0.30 | ±0.060 |
| 40.0-49.9 | - | ±0.40 | ±0.30 | ±0.20 |
| 50.0-90.0 | - | ±1.00 | ±0.40 | - |
Length and straightness:
| Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
| Cleaned | Ground/turned | ||
| 0.50-10.0 | ≥500 | ＜2.5 | ＜2.5 |
| 10.1-50.0 | ≥300 | ＜2.0 | ＜1.5 |
| 50.1-90.0 | ≥100 | ＜2.0 | ＜1.5 |
Length tolerance:
| Diameter 0.50-30.0 mm | ||||||
| Nominal length (mm) | ≥15 | 15-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±2.0 | ±3.0 | ±4.0 |
| Diameter ＞30.0 mm | ||||||
| Nominal length (mm) | ≥30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±0.5 | ±0.8 | ±1.2 | ±4.0 | ±6.0 | ±8.0 |
Density: ≥19.1g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
| Diameter(mm) | Hardness (HV 10) |
| 0.50-2.99 | — |
| 3.00-9.99 | 420-500 |
| 10.0-29.9 | 420-480 |
| 30.0-49.9 | 380-460 |
| ≥50 | ＞350 |
Surface condition:
| Diameter (mm) | Surface condition |
| 0.50-90.0 | Chemical cleaned |
| ≥40.0 | Turned Ra ≤3.2μm |
| 0.50-30 | Centerless ground Ra≤1.0μm |
| ≥40.0 | - Centerless ground Ra≤1.2μm |
