Cheapest Factory Tantalum Alloyed Sheet - Molybdenum alloy (TZM) Piercing Mandrel for seamless steel tube producing – Forged Tungsten
Cheapest Factory Tantalum Alloyed Sheet - Molybdenum alloy (TZM) Piercing Mandrel for seamless steel tube producing – Forged Tungsten Detail:
Molybdenum alloy (TZM) Piercing Mandrel for seamless steel tube producing TZM Chemical composition:
Main and minor components | Min.content(%) |
Mo | Balance |
Ti | 1.0-2.0% |
Zr | 0.1-0.5% |
C | 0.1-0.5% |
Impurities | Max.values (%) |
Al | 0.002 |
Fe | 0.006 |
Ca | 0.002 |
Ni | 0.003 |
Si | 0.003 |
Mg | 0.002 |
P | 0.001 |
TZM piercing mandrel diameter:15-350 mm,length:20-500 mm.
We could produce TZM piercing mandrel according your requirements and drawing.
Physical properties of TZM piercing mandrel:
Density≥9.8g/cm3
Hardness: HRC 25-29
Thermal conductivity (500ºC) [W/m K] : 127
Coefficient of thermal expansion αth (500ºC) [10-6 K-1] : 5.5
Modulus of elasticity [GPa] : 320
The physical properties of TZM differ very little from those of pure molybdenum. But small quantities of extremely fine carbides make TZM more resilient than pure molybdenum and give it a higher recrystallization temperature and greater creep resistance.
Product detail pictures:
Related Product Guide:
Travis Perkins PLC takes encouragement from improved trading | Slivery Color Molybdenum Sheet /Plate
Is Black Phosphorus the New Graphene? | Slivery Color Molybdenum Sheet /Plate
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Cheapest Factory Tantalum Alloyed Sheet - Molybdenum alloy (TZM) Piercing Mandrel for seamless steel tube producing – Forged Tungsten , The product will supply to all over the world, such as: venezuela , Egypt , Eindhoven , Providing Quality Items, Excellent Service, Competitive Prices and Prompt Delivery. Our products and solutions are selling well both in domestic and foreign markets. Our company is trying to be one important suppliers in China.
By Phoebe from Oman - 2017.04.08 14:55
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Daniel Coppin from Mumbai - 2017.08.21 14:13
Write your message here and send it to us