Chinese Professional Polished Molybdenum Rod Tzm Moly Rod/bar For Heating Furnace

Short Description:


Product Detail

Product Tags

Our intention would be to fulfill our consumers by offering golden support, great price and high-quality for Chinese Professional Polished Molybdenum Rod Tzm Moly Rod/bar For Heating Furnace, We welcome new and aged consumers to speak to us by telephone or send out us inquiries by mail for long term company associations and attaining mutual results.
Our intention would be to fulfill our consumers by offering golden support, great price and high-quality for Heating Furnace, Molybdenum Rod /bar, Tzm Moly Rod, Our solutions have national accreditation requirements for qualified, good quality products, affordable value, was welcomed by individuals all over the world. Our products will continue to improve inside the order and appear forward to cooperation with you, Definitely should any of those goods be of curiosity to you, be sure to letus know. We’ll be satisfied to supply you a quotation up on receipt of the detailed needs.
TZM rods
Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo blance balance
Ti 0.40-0.55% 0.40-0.55%
Zr 0.06-0.12% 0.06-0.12%
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 50
W 300 -
C 100-400 100-400
H 10 -
N 10 20
O 500 300
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Diameter (mm) Diameter tolerance (mm)
Ground
0.50-0.99 ±0.007
1.00-1.99 ±0.010
1.00-2.99 ±0.015
3.00-15.9 ±0.020
16.0-24.9 ±0.030
25.0-34.9 ±0.050
35.0-3939 ±0.060
≥40.0 ±0.20
Cleaned
0.50-4.0 ±2.0%
4.10-10.0 ±1.5%
15.0-50.0 ±0.30
51.0-75.0 ±0.40
75.1-120.0 ±1.00
121.0-165.0 ±1.50
Turned
40.0-49.9 ±0.30
50.0-165.0 ±0.40

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-0.99 >500 <2.5 <2.5
1.00-9.90 >300 <2.0 <1.5
10.0-165.0 >100 <1.5 <1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2.0
Diameter >30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±1.0 ±1.5 ±2.5 ±4.0 ±6.0 ±8.0

Density:
1. 0.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground.

Diameter(mm) Tensile strength(MPa) 0.2% Yield Strength(MPa) Elongation(%) Hardness(HV 10)
0.50-4.76 - - - -
4.76-22.20 ≥790 ≥690 ≥18  
22.20-28.60 ≥760 ≥655 ≥15 260-320
28.60-47.60 ≥690 ≥585 ≥10 250-310
47.60-73.00 ≥620 ≥550 ≥10 245-300
73.00-120.9 ≥585 ≥515 ≥5 240-290
121.0-165 ≥585 ≥515 ≥5 220-280

Surface condition:

Surface: Cleaned Ground Turned
  φ0.50-165mm φ0.50-50.00mm φ≥40.00mm
Roughness Diameter (mm) Ra (μm) Ground Ra (μm) Turned
  ≤2.50 ≤0.80 -
2.5-50.0 ≤1.00 -
≥40.0 - ≤3.2

  • Previous:
  • Next:

  • Write your message here and send it to us