Factory Customized Low Thermal Conductivity Alloy Tungsten Copper Plate
Dedicated to strict quality management and thoughtful client services, our experienced staff customers are generally available to discuss your demands and guarantee full client pleasure for Factory Customized Low Thermal Conductivity Alloy Tungsten Copper Plate, We sincerely welcome abroad clients to consult with the long-term cooperation along with the mutual growth.We strongly believe that we can do far better and far better.
Dedicated to strict quality management and thoughtful client services, our experienced staff customers are generally available to discuss your demands and guarantee full client pleasure for Copper Tungsten Alloy, Tungsten Copper, Tungsten Copper Plate, Business philosophy: Take the customer as the Center, take the quality as the life, integrity, responsibility, focus, innovation.We will present experienced, quality in return for the trust of customers, with most major global suppliers?ê?all of our employees will work together and move forward together.
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B760 |
| W | 99.97 | balance |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 15 | - |
| Cu | 10 | - |
| Cr | 20 | - |
| Fe | 30 | 100 |
| K | 10 | - |
| Ni | 20 | 100 |
| Si | 20 | 100 |
| Mo | 300 | - |
| C | 30 | 100 |
| H | 5 | - |
| N | 5 | 100 |
| O | 20 | 100 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Dimensions and tolerances:
Cold rolled sheets
| Thickness(mm) | Thickness tolerance(±mm) | ||
| Width≤200mm | Max.width 510mm | Width tolerance(±mm) | |
| 0.025 | 0.003 | ||
| 0.025-0.03 | 0.004 | 0.5 | |
| 0.03-0.04 | 0.005 | 0.5 | |
| 0.04-0.05 | 0.006 | 0.5 | |
| 0.05-0.06 | 0.008 | 0.5 | |
| 0.06-0.08 | 0.010 | 0.5 | |
| 0.08-0.10 | 0.015 | 0.5 | |
| 0.10-0.15 | 0.025 | 0.045 | 0.5 |
| 0.15-0.30 | 0.035 | 0.060 | 1.0 |
| 0.30-0.40 | 0.05 | 0.085 | 1.6 |
| 0.40-0.50 | 0.06 | 0.110 | 1.6 |
Hot rooled sheets
| Thickness(mm) | Thickness tolerance(±mm) | ||
| Width≤510mm | Max.width 1200(mm) | Width tolerance(±mm) | |
| 0.05-0.60 | 0.110 | 1.6 | |
| 0.60-0.80 | 0.140 | 2.0 | |
| 0.08-1.00 | 0.200 | 2.0 | |
| 1.00-2.00 | 0.250 | 2.0 | |
| 2.00-8.00 | 0.300 | 2.0 | |
| 8.0-20.00 | 5% | 5% | 2.0 |
Length tolerance: the length tolerance for all dimensions is maximal +5/-0 mm.
Flatness: max. 4% (measuring procedure on the basis of ASTM B760)
Density: thickness＜10.00mm density＞19.2g/cm³
thicknes（10.00-20.00mm）density＞19.1g/cm³
Vickers hardness:
≤0.10 mm ≥550 HV
0.10-0.05 mm ≥500 HV
0.50-1.50mm ≥470 HV
1.50-10.00mm ≥450 HV
10.00-20.00mm ≥420 HV
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures.
Bed sheet (not trimmed) may have small edge cracks.
Surface quality:
Cold rolled ≤ 0.30mm bright
Cold rolled 0.3-0.5 mm pickled
Hot rolled ≥0.50 mm pickled
