Free sample for Pure Molybdenum Washer - Factory Cheap Hot 99.95% Pure Mo(molybdenum) Plate /sheet – Forged Tungsten
Free sample for Pure Molybdenum Washer - Factory Cheap Hot 99.95% Pure Mo(molybdenum) Plate /sheet – Forged Tungsten Detail:
We’ve been also concentrating on bettering the things management and QC method in order that we could continue to keep terrific benefit inside the fiercely-competitive company for Factory Cheap Hot 99.95% Pure Mo(molybdenum) Plate /sheet, The concept of our organization is “Sincerity, Speed, Provider, and Satisfaction”. We are going to follow this concept and earn more and more customers’ satisfaction.
We’ve been also concentrating on bettering the things management and QC method in order that we could continue to keep terrific benefit inside the fiercely-competitive company for Mo Plate/sheet, Molybdenum Plate, Pure Mo(molybdenum) Plate /sheet, Since the establishment of our company, we now have realized the importance of providing good quality items and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question factors they do not understand. We break down those people barriers to ensure you get what you want to the level you expect, when you want it.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets
Thickness(mm) | Thickness tolerance(±mm) | Max.width(mm) | Width tolerance(±mm) |
0.10 | 0.008 | 305 | 0.5 |
0.10-0.127 | 0.010 | 305 | 0.5 |
0.127-0.15 | 0.010 | 610 | 0.5 |
0.15-0.25 | 0.015 | 800 | 0.5 |
0.25-0.50 | 0.020 | 915 | 1.6 |
0.50-0.80 | 0.028 | 915 | 1.6 |
0.80-1.20 | 0.035 | 915 | 1.6 |
1.20-2.00 | 3% | 915 | 1.6 |
Cold rooled sheets
Thickness(mm) | Thickness tolerance(±mm) | Max.width(mm) | Width tolerance(±mm) |
1.00 | 0.080 | 850 | 2.0 |
1.00-1.50 | 0.130 | 850 | 2.0 |
1.50-2.00 | 0.150 | 850 | 2.0 |
2.00-3.60 | 0.180 | 1200 | 2.0 |
3.60-50.00 | 5% | 1500 | 2.0 |
Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness<0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: >200 HV
Tensile test:
Thickness(mm) | Tensile Srenght Min. (MPa) | 0.2 % Yield strength Min. (MPa) | ElongationMin.(%) |
0.1-0.25 | 700 | 620 | 2.0 |
0.25-0.40 | 680 | 590 | 3.0 |
0.40-0.65 | 680 | 590 | 5.0 |
0.65-1.50 | 680 | 580 | 10.0 |
1.50-2.30 | 640 | 580 | 12.0 |
2.30-5.00 | 640 | 580 | 15.0 |
5.00-10.00 | 640 | 580 | 10.0 |
10.00-13.00 | 590 | 540 | 10.0 |
13.00-25.00 | 500 | 480 | 2.0 |
25.00-50.00 | 500 | 480 | 1.0 |
Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | 99.97 | balance |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 30 | 100 |
H | 10 | 20 |
N | 10 | 70 |
O | 40 | - |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Product detail pictures:
Related Product Guide:
Controlling the degradation kinetics of porous iron by poly(lactic-co-glycolic acid) infiltration for use as temporary medical implants | Niobium Carbide Alloy Powder
Gallery Shows in New York City This Month | Slivery Color Molybdenum Sheet /Plate
All we do is always involved with our tenet " Consumer initial, Trust first, devoting within the food stuff packaging and environmental defense for Free sample for Pure Molybdenum Washer - Factory Cheap Hot 99.95% Pure Mo(molybdenum) Plate /sheet – Forged Tungsten , The product will supply to all over the world, such as: Algeria , Holland , Brunei , We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We will not live up to the historic opportunity of the times.
By Susan from Greenland - 2018.02.04 14:13
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Cindy from Poland - 2017.10.25 15:53