Hot New Products Micro Grain Tungsten Carbide Tips Drill Rod
We enjoy an extremely good status among our prospects for our great merchandise top quality, competitive price and the ideal service for Hot New Products Micro Grain Tungsten Carbide Tips Drill Rod, Top quality and competitive rates make our items delight in a superior standing everywhere in the word.
We enjoy an extremely good status among our prospects for our great merchandise top quality, competitive price and the ideal service for Carbide Tips Drill Rods, Solid Carbide Rod, Tungsten Carbide Rod, We believe in quality and customer satisfaction achieved by a team of highly dedicated individuals. The team of our company with the use of cutting-edge technologies delivers impeccable quality products supremely adored and appreciated by our customers worldwide.
Chemical composition:
| Main and minor components | Min.content(%) | ASTM B760 |
| W | 99.95 | balance |
| Impurities | Max.values (μg/g) | Max.values (μg/g) |
| Al | 15 | - |
| Cu | 10 | - |
| Cr | 20 | - |
| Fe | 30 | 100 |
| K | 10 | - |
| Ni | 20 | 100 |
| Si | 20 | 100 |
| Mo | 100 | - |
| C | 30 | 100 |
| H | 5 | - |
| N | 5 | 100 |
| O | 20 | 100 |
| Cd | 5 | - |
| Hg | 1 | - |
| Pb | 5 | - |
Diameter and tolerances:
| Diameter (mm) | Tolerance | |||
| Straightened | Forged | Turned | Ground | |
| 0.50-0.99 | - | - | ±0.007 | |
| 1.00-1.99 | - | - | ±0.010 | |
| 2.00-2.99 | ±2.0 % | - | ±0.015 | |
| 3.00-15.9 | - | - | ±0.020 | |
| 16.0-24.9 | - | ±0.30 | ±0.030 | |
| 25.0-34.9 | - | ±0.40 | ±0.050 | |
| 35.0-39.9 | - | ±0.40 | ±0.30 | ±0.060 |
| 40.0-49.9 | - | ±0.40 | ±0.30 | ±0.20 |
| 50.0-90.0 | - | ±1.00 | ±0.40 | - |
Length and straightness:
| Diameter (mm) | Production length (mm) | Stiraightness/Meter (mm) | |
| Cleaned | Ground/turned | ||
| 0.50-10.0 | ≥500 | ＜2.5 | ＜2.5 |
| 10.1-50.0 | ≥300 | ＜2.0 | ＜1.5 |
| 50.1-90.0 | ≥100 | ＜2.0 | ＜1.5 |
Length tolerance:
| Diameter 0.50-30.0 mm | ||||||
| Nominal length (mm) | ≥15 | 15-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±0.2 | ±0.3 | ±0.5 | ±2.0 | ±3.0 | ±4.0 |
| Diameter ＞30.0 mm | ||||||
| Nominal length (mm) | ≥30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | ＞2000 |
| Length tolerance(mm) | ±0.5 | ±0.8 | ±1.2 | ±4.0 | ±6.0 | ±8.0 |
Density: ≥19.1g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.
| Diameter(mm) | Hardness (HV 10) |
| 0.50-2.99 | — |
| 3.00-9.99 | 420-500 |
| 10.0-29.9 | 420-480 |
| 30.0-49.9 | 380-460 |
| ≥50 | ＞350 |
Surface condition:
| Diameter (mm) | Surface condition |
| 0.50-90.0 | Chemical cleaned |
| ≥40.0 | Turned Ra ≤3.2μm |
| 0.50-30 | Centerless ground Ra≤1.0μm |
| ≥40.0 | - Centerless ground Ra≤1.2μm |
