China Hot New Products Tungsten Copper Alloy Crucible - Good User Reputation for Purity 99.95% Mo Molybdenum Sheet – Forged Tungsten Manufacturer and Supplier

Hot New Products Tungsten Copper Alloy Crucible - Good User Reputation for Purity 99.95% Mo Molybdenum Sheet – Forged Tungsten

Short Description:

Product Detail

Product Tags

Feedback (2)

Our staff through skilled training. Skilled skilled knowledge, potent sense of company, to satisfy the provider requirements of consumers for Fine Tungsten Wire , Tungsten Heat Element , Molybdenum Boat , Welcome to visit our firm and factory. Be sure to come to feel free to get in touch with us in case you need any additional assistance.

Hot New Products Tungsten Copper Alloy Crucible - Good User Reputation for Purity 99.95% Mo Molybdenum Sheet – Forged Tungsten Detail:

We consistently carry out our spirit of ”Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for Good User Reputation for Purity 99.95% Mo Molybdenum Sheet, Any necessitates from you will be compensated with our greatest consideration!
We consistently carry out our spirit of ”Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for 99.95% Molybdenum Sheet, Molybdenum Sheet, Momolybdenum Sheet, We’re in continuous service to our growing local and international clients. We aim to be worldwide leader in this industry and with this mind; it is our great pleasure to serve and bringing the highest satisfaction rates among the growing market.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
0.10	0.008	305	0.5
0.10-0.127	0.010	305	0.5
0.127-0.15	0.010	610	0.5
0.15-0.25	0.015	800	0.5
0.25-0.50	0.020	915	1.6
0.50-0.80	0.028	915	1.6
0.80-1.20	0.035	915	1.6
1.20-2.00	3%	915	1.6

Cold rooled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
1.00	0.080	850	2.0
1.00-1.50	0.130	850	2.0
1.50-2.00	0.150	850	2.0
2.00-3.60	0.180	1200	2.0
3.60-50.00	5%	1500	2.0

Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness＜0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: ＞200 HV
Tensile test:

Thickness(mm)	Tensile Srenght Min. (MPa)	0.2 % Yield strength Min. (MPa)	ElongationMin.(%)
0.1-0.25	700	620	2.0
0.25-0.40	680	590	3.0
0.40-0.65	680	590	5.0
0.65-1.50	680	580	10.0
1.50-2.30	640	580	12.0
2.30-5.00	640	580	15.0
5.00-10.00	640	580	10.0
10.00-13.00	590	540	10.0
13.00-25.00	500	480	2.0
25.00-50.00	500	480	1.0

Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	99.97	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	100
W	300	-
C	30	100
H	10	20
N	10	70
O	40	-
Cd	5	-
Hg	1	-
Pb	5	-

Product detail pictures:

Related Product Guide:
The Story of Henry Bessemer | Pure Molybdenum Strip
2D molybdenum disulfide: a promising new optical material for ultra-fast photonics | Tungsten Boats For Heating

The incredibly abundant projects administration experiences and 1 to one provider model make the superior importance of small business communication and our easy understanding of your expectations for Hot New Products Tungsten Copper Alloy Crucible - Good User Reputation for Purity 99.95% Mo Molybdenum Sheet – Forged Tungsten , The product will supply to all over the world, such as: Slovakia , Tunisia , Oman , Our team knows well the market demands in different countries, and is capable of supplying suitable quality products at the best prices to different markets. Our company has already set up a professional, creative and responsible team to develop clients with the multi-win principle.

Heating Element Radiation Shield

Molybdenum Round Plate/Sheet

Pure Molybdenum Crucible

Pure Tantalum Crucibles

Tungsten Alloy Plate

White Tungsten Wire

This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.