ODM Manufacturer Technical Grade Pure Tantalum Rod

Short Description:


Product Detail

Product Tags

High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we’re hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for ODM Manufacturer Technical Grade Pure Tantalum Rod, When you’ve got any remarks about our firm or merchandise, please come to feel no cost to call us, your coming mail will likely be really appreciated.
High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we’re hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for Pure Tantalum Rod, Tantalum Rod, Technical Grade Tantalum Rod, We welcome you to visit our company and factory. It is also convenient to visit our website. Our sales team will offer you the best service. If you need more information, please feel free to contact us by E-mail or telephone. We are sincerely hope to establish a good long-term business relationship with you through this opportunity, based on equal, mutual benefit from now till the future.
Chemical composition:

Main and minor components Min.content(%) ASTM B365
Ta 99.95 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Fe 100 100
Mo 100 200
Nb 400 1000
Ni 50 100
Si 50 50
Ti 50 100
W 100 500
C 30 200
H 15 15
N 50 100
O 100 250
Cd 10 -
Hg 1 -
Pb 10 -

Diameter and tolerance

Diameter (mm) Diameter tolerance (mm)
Ground
3.00-15.9 ±0.05
16.0-24.9 ±0.10
25.0-34.9 ±0.25
35.0-39.9 ±0.40
40.0-50.0 ±0.80
Cleaned
3.00-4.74 ±0.076
4.75-9.51 ±0.102
9.52-12.69 ±0.127
12.70-15.87 ±0.178
15.88-19.04 ±0.203
19.05-25.39 ±0.254
25.40-38.09 ±0.381
38.10-50.79 ±0.508
50.80-63.49 ±0.762
63.50-120.0 ±1.50
Turned
30.0-49.9 ±0.30
50.0-120.0 ±0.40

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
3.00-9.90 >500 <2.5 <2.0
10.0-120.0 >300 <2.5 <1.5

Length tolerance:

Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±1.0 ±1.5 ±2.5 ±4.0 ±6.0 ±8.0

Density: ≥16.6g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm: Eddy curent tests on rods with ground surface.

Diameter(mm) Tensile strength(MPa) 0.2% Yield Strength (MPa) Elongation(%)
3.00-3.19 ≥207 - ≥20
3.20-63.5 ≥172 ≥103 ≥25

Surface condition:

Surface Pickled Ground Turned
  φ3.0-165.0mm φ3.0-50.00mm φ≥30.00mm
Roughness Diameter (mm) Ra (μm) Ground Ra (μm) Turned
  3.0-50.0 ≤1.20 -
≥30.0 - ≤3.2

  • Previous:
  • Next:

  • Write your message here and send it to us