China OEM Factory for Vacuum Furnace Heat Shield - 2019 Latest Design Ground Molybdenum Alloy Tzm Plate/sheet – Forged Tungsten Manufacturer and Supplier

OEM Factory for Vacuum Furnace Heat Shield - 2019 Latest Design Ground Molybdenum Alloy Tzm Plate/sheet – Forged Tungsten

Short Description:

Product Detail

Product Tags

Feedback (2)

Gaining purchaser gratification is our firm's intention eternally. We will make wonderful endeavours to build new and top-quality merchandise, satisfy your exclusive needs and provide you with pre-sale, on-sale and after-sale products and services for High Density Molybdenum Bar , Tungsten Thread , Pure Molybdenum Foils , Never-ending improvement and striving for 0% deficiency are our two main excellent policies. Should you need anything, never be reluctant to speak to us.

OEM Factory for Vacuum Furnace Heat Shield - 2019 Latest Design Ground Molybdenum Alloy Tzm Plate/sheet – Forged Tungsten Detail:

Our primary target will be to provide our clients a serious and responsible small business relationship, supplying personalized attention to all of them for 2019 Latest Design Ground Molybdenum Alloy Tzm Plate/sheet, Let’s cooperate hand in hand to jointly create a beautiful future. We sincerely welcome you to visit our business or call us for cooperation!
Our primary target will be to provide our clients a serious and responsible small business relationship, supplying personalized attention to all of them for Molybdenum Alloy Tzm Plate, Tzm Plate, Tzm Sheet, With a team of experienced and knowledgeable personnel, our market covers South America, the USA, the Mid East, and North Africa. Many customers have become our friends after good cooperation with us. If you have the requirement for any of our products, remember to contact us now. We are looking forward to hearing from you soon.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
0.10	0.008	305	0.5
0.10-0.127	0.010	305	0.5
0.127-0.15	0.010	610	0.5
0.15-0.25	0.015	800	0.5
0.25-0.50	0.020	915	1.6
0.50-0.80	0.028	915	1.6
0.80-1.20	0.035	915	1.6
1.20-2.00	3%	915	1.6

Cold rooled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
1.00	0.080	850	2.0
1.00-1.50	0.130	850	2.0
1.50-2.00	0.150	850	2.0
2.00-3.60	0.180	1200	2.0
3.60-50.00	5%	1500	2.0

Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness＜0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: ＞200 HV
Tensile test:

Thickness(mm)	Tensile Srenght Min. (MPa)	0.2 % Yield strength Min. (MPa)	ElongationMin.(%)
0.1-0.25	700	620	2.0
0.25-0.40	680	590	3.0
0.40-0.65	680	590	5.0
0.65-1.50	680	580	10.0
1.50-2.30	640	580	12.0
2.30-5.00	640	580	15.0
5.00-10.00	640	580	10.0
10.00-13.00	590	540	10.0
13.00-25.00	500	480	2.0
25.00-50.00	500	480	1.0

Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	99.97	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	100
W	300	-
C	30	100
H	10	20
N	10	70
O	40	-
Cd	5	-
Hg	1	-
Pb	5	-

Product detail pictures:

Related Product Guide:
Berkeley Talks transcript: Berkeley Law Professor Catherine Fisk on reimagining labor law | Tungsten Boats For Heating
Global MoSi2 Heating Element Market Insights Report 2019-2023: Kanthal, I Squared R, Henan Songshan, ZIRCAR, Yantai Torch, MHI | Niobium Carbide Alloy Powder

We retain bettering and perfecting our goods and service. At the same time, we perform actively to do research and enhancement for OEM Factory for Vacuum Furnace Heat Shield - 2019 Latest Design Ground Molybdenum Alloy Tzm Plate/sheet – Forged Tungsten , The product will supply to all over the world, such as: Tunisia , Uzbekistan , Lithuania , It using the world's leading system for reliable operation, a low failure rate, it suitable for Argentina customers choice. Our company is situated within the national civilized cities, the traffic is very convenient, unique geographical and economic conditions. We pursue a people-oriented, meticulous manufacturing, brainstorm, build brilliant" business philosophy. Strict quality management, perfect service, reasonable price in Argentina is our stand on the premise of competition. If necessary, welcome to contact us by our website or phone consultation, we'll be happy to serve you.

Seamless Molybdenum Tube