China OEM/ODM Factory High Precision Tungsten Foil - OEM Factory for Purity Low Molybdenum Moly Tzm Tube Pipe Block Sheet – Forged Tungsten Manufacturer and Supplier

OEM/ODM Factory High Precision Tungsten Foil - OEM Factory for Purity Low Molybdenum Moly Tzm Tube Pipe Block Sheet – Forged Tungsten

Short Description:

Product Detail

Product Tags

Feedback (2)

It adheres for the tenet "Honest, industrious, enterprising, innovative" to develop new products and solutions continuously. It regards shoppers, success as its individual success. Let us produce prosperous future hand in hand for Pure Tungsten Foil , Tungsten Small Boat , Tungsten Heat Element , Should you be fascinated in any of our products and services, remember to do not hesitate to make contact with us. We're ready to reply you inside of 24 several hours soon after receipt of one's ask for and also to develop mutual un-limited advantages and organization in around potential.

OEM/ODM Factory High Precision Tungsten Foil - OEM Factory for Purity Low Molybdenum Moly Tzm Tube Pipe Block Sheet – Forged Tungsten Detail:

owing to excellent company, a variety of top quality products and solutions, competitive rates and efficient delivery, we take pleasure in an excellent reputation between our shoppers. We’ve been an energetic organization with wide market for OEM Factory for Purity Low Molybdenum Moly Tzm Tube Pipe Block Sheet, Safety through innovation is our promise to each other.
owing to excellent company, a variety of top quality products and solutions, competitive rates and efficient delivery, we take pleasure in an excellent reputation between our shoppers. We’ve been an energetic organization with wide market for Molybdenum Pipe, Molybdenum Sheet, Molybdenum Tube, Our stock have valued 8 million dollar , you can find the competitive parts within short delivery time. Our company is not only your partner in business, but also our company is your assistant in the coming corporation.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
0.10	0.008	305	0.5
0.10-0.127	0.010	305	0.5
0.127-0.15	0.010	610	0.5
0.15-0.25	0.015	800	0.5
0.25-0.50	0.020	915	1.6
0.50-0.80	0.028	915	1.6
0.80-1.20	0.035	915	1.6
1.20-2.00	3%	915	1.6

Cold rooled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
1.00	0.080	850	2.0
1.00-1.50	0.130	850	2.0
1.50-2.00	0.150	850	2.0
2.00-3.60	0.180	1200	2.0
3.60-50.00	5%	1500	2.0

Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness＜0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: ＞200 HV
Tensile test:

Thickness(mm)	Tensile Srenght Min. (MPa)	0.2 % Yield strength Min. (MPa)	ElongationMin.(%)
0.1-0.25	700	620	2.0
0.25-0.40	680	590	3.0
0.40-0.65	680	590	5.0
0.65-1.50	680	580	10.0
1.50-2.30	640	580	12.0
2.30-5.00	640	580	15.0
5.00-10.00	640	580	10.0
10.00-13.00	590	540	10.0
13.00-25.00	500	480	2.0
25.00-50.00	500	480	1.0

Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	99.97	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	100
W	300	-
C	30	100
H	10	20
N	10	70
O	40	-
Cd	5	-
Hg	1	-
Pb	5	-

Product detail pictures:

Related Product Guide:
Augmented Revenues To Be Witnessed By Hot Stamping Foil by 2019 – 2027 | Slivery Color Molybdenum Sheet /Plate
Laser manipulates electronic properties — ScienceDaily | Pure Molybdenum Strip

The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for OEM/ODM Factory High Precision Tungsten Foil - OEM Factory for Purity Low Molybdenum Moly Tzm Tube Pipe Block Sheet – Forged Tungsten , The product will supply to all over the world, such as: Porto , Norwegian , Croatia , For anyone who is keen on any of our items right after you view our product list, you should definitely feel absolutely free to get in touch with us for inquiries. You are able to send us emails and contact us for consultation and we shall respond to you as soon as we can. If it's easy, you may locate out our address in our web-site and come to our business for far more information of our merchandise by your self. We're always ready to construct extended and steady co-operation relations with any possible customers in the related fields.

Niobium Titanium Alloy Bar

Pure Tantalum Crucibles

Sapphire Growing Furnace Hot Zone

Tantalum Sheet Plate

Tungsten Bar With Thread

Tungsten Heat Wire

Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!