Well-designed Tzm Molybdenum Sheet Plate

Short Description:


Product Detail

Product Tags

We know that we only thrive if we could guarantee our combined price competiveness and high quality advantageous at the same time for Well-designed Tzm Molybdenum Sheet Plate, For further queries or should you have any question regarding our solutions, you should usually do not wait to speak to us.
We know that we only thrive if we could guarantee our combined price competiveness and high quality advantageous at the same time for Tzm Molybdenum Sheet, Tzm Plate, Tzm Sheet, As operation principle is “be market-oriented , good faith as principle, win-win as objective”, holding on “customer first, quality assurance, service first” as our purpose, dedicated to offer the original quality, create excellence service , we won the praise and trust in the industry of auto parts. In the future, We are going to present quality product and excellent service in return to our customers , welcome any suggestions and feedback from all over the world.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets

Thickness(mm) Thickness tolerance(±mm) Max.width(mm) Width tolerance(±mm)
0.10 0.008 305 0.5
0.10-0.127 0.010 305 0.5
0.127-0.15 0.010 610 0.5
0.15-0.25 0.015 800 0.5
0.25-0.50 0.020 915 1.6
0.50-0.80 0.028 915 1.6
0.80-1.20 0.035 915 1.6
1.20-2.00 3% 915 1.6

Cold rooled sheets

Thickness(mm) Thickness tolerance(±mm) Max.width(mm) Width tolerance(±mm)
1.00 0.080 850 2.0
1.00-1.50 0.130 850 2.0
1.50-2.00 0.150 850 2.0
2.00-3.60 0.180 1200 2.0
3.60-50.00 5% 1500 2.0

Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness<0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: >200 HV
Tensile test:

Thickness(mm) Tensile Srenght Min. (MPa) 0.2 % Yield strength Min. (MPa) ElongationMin.(%)
0.1-0.25 700 620 2.0
0.25-0.40 680 590 3.0
0.40-0.65 680 590 5.0
0.65-1.50 680 580 10.0
1.50-2.30 640 580 12.0
2.30-5.00 640 580 15.0
5.00-10.00 640 580 10.0
10.00-13.00 590 540 10.0
13.00-25.00 500 480 2.0
25.00-50.00 500 480 1.0

Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo 99.97 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 100
W 300 -
C 30 100
H 10 20
N 10 70
O 40 -
Cd 5 -
Hg 1 -
Pb 5 -

  • Previous:
  • Next:

  • Write your message here and send it to us