Cheapest Price Custom Made Molybdenum Rod

Short Description:


Product Detail

Product Tags

Sticking for the perception of “Creating products of top quality and producing friends with people today from all around the world”, we constantly place the desire of shoppers to start with for Cheapest Price Custom Made Molybdenum Rod, If needed, welcome to create get hold of with us by our web page or telephone consultation, we’re going to be delighted to provide you.
Sticking for the perception of “Creating products of top quality and producing friends with people today from all around the world”, we constantly place the desire of shoppers to start with for Molybdenum Rod, Each customer’s satisfactory is our goal. We’ve been looking for long-term cooperation with each customer. To meet this, we keep up our quality and give extraordinary customer service. Welcome to our company, we are expecting to cooperate with you.
Molybdenum rods Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo 99.95 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 100
W 300 -
C 30 100
H 10 20
N 10 70
O 40 -
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Diameter (mm) Diameter tolerance (mm)
Ground
0.50-0.99 ±0.007
1.00-1.99 ±0.010
1.00-2.99 ±0.015
3.00-15.9 ±0.020
16.0-24.9 ±0.030
25.0-34.9 ±0.050
35.0-3939 ±0.060
≥40.0 ±0.20
Cleaned
0.50-4.0 ±2.0%
4.10-10.0 ±1.5%
15.0-50.0 ±0.30
51.0-75.0 ±0.40
75.1-120.0 ±1.00
121.0-165.0 ±1.50
Turned
40.0-49.9 ±0.30
50.0-165.0 ±0.40

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-0.99 >500 <2.5 <2.5
1.00-9.90 >300 <2.0 <1.5
10.0-165.0 >100 <1.5 <1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2.0
Diameter >30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±1.0 ±1.5 ±2.5 ±4.0 ±6.0 ±8.0

Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm) Tensile strength(MPa) 0.2% Yield Strength(MPa) Elongation(%) Hardness(HV 10)
0.50-3.18 ≥585 ≥450 ≥15  
3.18-10.30 ≥515 ≥380 ≥15  
10.32-22.20 ≥620 ≥515 ≥18 230-280
22.20-28.60 ≥585 ≥480 ≥15 225-270
28.60-47.60 ≥515 ≥450 ≥10 215-260
47.60-73.00 ≥480 ≥415 ≥10 210-250
73.00-88.90 ≥450 ≥380 ≥10 205-240
89.00-120.9 ≥450 ≥380 ≥5 200-240
121.0-164.9 ≥450 ≥380 ≥5 180-240
165.0 ≥450 ≥380 ≥- 180-240

Surface condition:

Surface: Cleaned Ground Turned
  φ0.50-165mm φ0.50-50.00mm φ≥40.00mm
Roughness Diameter (mm) Ra (μm) Ground Ra (μm) Turned
  ≤2.50 ≤0.80 -
2.5-50.0 ≤1.00 -
≥40.0 - ≤3.2

  • Previous:
  • Next:

  • Write your message here and send it to us