Professional China Molybedenum Rod Molybdenum Bar

Short Description:


Product Detail

Product Tags

We’re proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Professional China Molybedenum Rod Molybdenum Bar, We welcome prospects, organization associations and close friends from all pieces with the globe to get in touch with us and look for cooperation for mutual gains.
We’re proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Molybedenum Bar, Molybedenum Rod, We have been introduced as a one of the growing manufacture supplier and export of our goods. Now we have a team of dedicated trained professional who take care the quality and timely supply. If you are looking for Good Quality at a good price and timely delivery. Do contact us.
Molybdenum rods Chemical composition:

Main and minor components Min.content(%) ASTM B386 (361)
Mo 99.95 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 10 -
Cu 20 -
Cr 20 -
Fe 20 100
K 20 -
Ni 10 50
Si 20 100
W 300 -
C 30 100
H 10 20
N 10 70
O 40 -
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:

Diameter (mm) Diameter tolerance (mm)
Ground
0.50-0.99 ±0.007
1.00-1.99 ±0.010
1.00-2.99 ±0.015
3.00-15.9 ±0.020
16.0-24.9 ±0.030
25.0-34.9 ±0.050
35.0-3939 ±0.060
≥40.0 ±0.20
Cleaned
0.50-4.0 ±2.0%
4.10-10.0 ±1.5%
15.0-50.0 ±0.30
51.0-75.0 ±0.40
75.1-120.0 ±1.00
121.0-165.0 ±1.50
Turned
40.0-49.9 ±0.30
50.0-165.0 ±0.40

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-0.99 >500 <2.5 <2.5
1.00-9.90 >300 <2.0 <1.5
10.0-165.0 >100 <1.5 <1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2.0
Diameter >30.0 mm
Nominal length (mm) 6-30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±1.0 ±1.5 ±2.5 ±4.0 ±6.0 ±8.0

Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm) Tensile strength(MPa) 0.2% Yield Strength(MPa) Elongation(%) Hardness(HV 10)
0.50-3.18 ≥585 ≥450 ≥15  
3.18-10.30 ≥515 ≥380 ≥15  
10.32-22.20 ≥620 ≥515 ≥18 230-280
22.20-28.60 ≥585 ≥480 ≥15 225-270
28.60-47.60 ≥515 ≥450 ≥10 215-260
47.60-73.00 ≥480 ≥415 ≥10 210-250
73.00-88.90 ≥450 ≥380 ≥10 205-240
89.00-120.9 ≥450 ≥380 ≥5 200-240
121.0-164.9 ≥450 ≥380 ≥5 180-240
165.0 ≥450 ≥380 ≥- 180-240

Surface condition:

Surface: Cleaned Ground Turned
  φ0.50-165mm φ0.50-50.00mm φ≥40.00mm
Roughness Diameter (mm) Ra (μm) Ground Ra (μm) Turned
  ≤2.50 ≤0.80 -
2.5-50.0 ≤1.00 -
≥40.0 - ≤3.2

  • Previous:
  • Next:

  • Write your message here and send it to us