Factory source Purity W>99.95% Annealed Tungsten Sheet

Short Description:


Product Detail

Product Tags

We know that we only thrive if we could guarantee our combined price competiveness and high quality advantageous at the same time for Factory source Purity W>99.95% Annealed Tungsten Sheet, Special emphasis within the packaging of solutions to avoid any damage during transportation,Detailed attention towards the useful feedback and suggestions of our esteemed clients.
We know that we only thrive if we could guarantee our combined price competiveness and high quality advantageous at the same time for Tungsten Plate, Tungsten Sheet, Tungsten Sheet Metal, “Good quality, Good service ” is always our tenet and credo. We take every effort to control the quality, package, labels etc and our QC will check every detail during producing and before shipment. We have been willing to establish long business relationship with those people who seek the high quality products and solutions and good service. We’ve set up a wide sales network across European countries, North of America, South of America, Middle East, Africa, East Asia countries.Make sure you contact us now, you will find our expert experience and high quality grades will contribute to your business.
Chemical composition:

Main and minor components Min.content(%) ASTM B760
W 99.97 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 15 -
Cu 10 -
Cr 20 -
Fe 30 100
K 10 -
Ni 20 100
Si 20 100
Mo 300 -
C 30 100
H 5 -
N 5 100
O 20 100
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:
Cold rolled sheets

Thickness(mm) Thickness tolerance(±mm)  
Width≤200mm Max.width 510mm Width tolerance(±mm)
0.025 0.003    
0.025-0.03 0.004   0.5
0.03-0.04 0.005   0.5
0.04-0.05 0.006   0.5
0.05-0.06 0.008   0.5
0.06-0.08 0.010   0.5
0.08-0.10 0.015   0.5
0.10-0.15 0.025 0.045 0.5
0.15-0.30 0.035 0.060 1.0
0.30-0.40 0.05 0.085 1.6
0.40-0.50 0.06 0.110 1.6

Hot rooled sheets

Thickness(mm) Thickness tolerance(±mm)  
Width≤510mm Max.width 1200(mm) Width tolerance(±mm)
0.05-0.60 0.110   1.6
0.60-0.80 0.140   2.0
0.08-1.00 0.200   2.0
1.00-2.00 0.250   2.0
2.00-8.00 0.300   2.0
8.0-20.00 5% 5% 2.0

Length tolerance: the length tolerance for all dimensions is maximal +5/-0 mm.
Flatness: max. 4% (measuring procedure on the basis of ASTM B760)
Density: thickness<10.00mm density>19.2g/cm³
thicknes(10.00-20.00mm)density>19.1g/cm³
Vickers hardness:
≤0.10 mm ≥550 HV
0.10-0.05 mm ≥500 HV
0.50-1.50mm ≥470 HV
1.50-10.00mm ≥450 HV
10.00-20.00mm ≥420 HV
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures.
Bed sheet (not trimmed) may have small edge cracks.
Surface quality:
Cold rolled ≤ 0.30mm bright
Cold rolled 0.3-0.5 mm pickled
Hot rolled ≥0.50 mm pickled


  • Previous:
  • Next:

  • Write your message here and send it to us