China Factory Supply Niobium Sheet In Stock - 100% Original Best15m Franchise Business For Sale Molybdenum Powder In Very Comeptitive – Forged Tungsten Manufacturer and Supplier

Factory Supply Niobium Sheet In Stock - 100% Original Best15m Franchise Business For Sale Molybdenum Powder In Very Comeptitive – Forged Tungsten

Short Description:

Product Detail

Product Tags

Feedback (2)

With our abundant experience and considerate products and services, we have been recognized to be a reputable supplier for a lot of global consumers for Ground Tungsten Rods , Molybdenum Tube , Niobium Bar Rod , sincerity and strength ,always keep approved good quanlity ,welcome to our factoty for visit and instruction and business.

Factory Supply Niobium Sheet In Stock - 100% Original Best15m Franchise Business For Sale Molybdenum Powder In Very Comeptitive – Forged Tungsten Detail:

We also present product or service sourcing and flight consolidation companies. We’ve our own manufacturing unit and sourcing office. We can easily provide you with nearly every form of merchandise similar to our product variety for 100% Original Best15m Franchise Business For Sale Molybdenum Powder In Very Comeptitive, How about to start your good business with our company? We are ready, trained and fulfilled with pride. Let’s start our new business with new wave.
We also present product or service sourcing and flight consolidation companies. We’ve our own manufacturing unit and sourcing office. We can easily provide you with nearly every form of merchandise similar to our product variety for Molybdenum Powder, Molybdenum Powder In Very Comeptitive, Molybdenum Sheet, The president and all the company members would like to provide qualified goods and services for customers and sincerely welcome and cooperate with all native and foreign customers for a bright future.
Molybdenum Sheet
1.Thickness and width tolerances
Cold rolled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
0.10	0.008	305	0.5
0.10-0.127	0.010	305	0.5
0.127-0.15	0.010	610	0.5
0.15-0.25	0.015	800	0.5
0.25-0.50	0.020	915	1.6
0.50-0.80	0.028	915	1.6
0.80-1.20	0.035	915	1.6
1.20-2.00	3%	915	1.6

Cold rooled sheets

Thickness(mm)	Thickness tolerance(±mm)	Max.width(mm)	Width tolerance(±mm)
1.00	0.080	850	2.0
1.00-1.50	0.130	850	2.0
1.50-2.00	0.150	850	2.0
2.00-3.60	0.180	1200	2.0
3.60-50.00	5%	1500	2.0

Length tolerace:
The length tolerace for sheet length up to 2500 mm is max. +5/-0 mm.
The length tolerance of sheet cuts can vary with a total tolerance range not exceeding the above given value. The maximum sheet dimensions depend on the sheet thickness.other dimensions upon request.
Sheet with premium surface condition are available from 0.15 to 1 mm.Sheet with thickness from 0.127 to 0.381 mm can be delivered as coils upon request.(production length max.10500mm)
Flatness:
Max.1% for sheet thickness≥0.3mm
Max.4% for sheet thickness＜0.3mm
(measuring proedure on the basis of ASTM B386)
2. Physical and mechanical product properties.
Density: ≥10.2g/cm³
Vickers Hardness:
≤1.0mm: 240-280 HV
1.00-3.60mm: 240-270 HV
306-10.00mm: 220-270 HV
10.00-50.00: ＞200 HV
Tensile test:

Thickness(mm)	Tensile Srenght Min. (MPa)	0.2 % Yield strength Min. (MPa)	ElongationMin.(%)
0.1-0.25	700	620	2.0
0.25-0.40	680	590	3.0
0.40-0.65	680	590	5.0
0.65-1.50	680	580	10.0
1.50-2.30	640	580	12.0
2.30-5.00	640	580	15.0
5.00-10.00	640	580	10.0
10.00-13.00	590	540	10.0
13.00-25.00	500	480	2.0
25.00-50.00	500	480	1.0

Surface condition
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures. bed sheet(not trimmed) may have small edge cracks.
Surface defects are assessed in the frame of visual inspection.
Local surface defects can be removed by frinding within the specified thickness tolerace.
Surface condition: Cold rolled, bright(≤1mm) Ra≤0.20μm
Cold rolled, pickled: Ra≤1.00μm
Cold rolled ground: Ra≤0.60μm
Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	99.97	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	100
W	300	-
C	30	100
H	10	20
N	10	70
O	40	-
Cd	5	-
Hg	1	-
Pb	5	-

Product detail pictures:

Related Product Guide:
H.C. Starck reports positive results across all divisions for 2017 | Tungsten Boats For Heating
Industrial Use Electric Motor UAVs Market Overview and Forecast 2019 to 2025 | AeroVironment, Airbus Group, Facebook | Slivery Color Molybdenum Sheet /Plate

We emphasize enhancement and introduce new solutions into the market just about every year for Factory Supply Niobium Sheet In Stock - 100% Original Best15m Franchise Business For Sale Molybdenum Powder In Very Comeptitive – Forged Tungsten , The product will supply to all over the world, such as: Armenia , Victoria , Qatar , Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.

Molybdenum Coiled Strips