Factory wholesale Tungsten Screw And Nut - Special Design for Ground Tzm Molybdenum Plate/cube/block – Forged Tungsten
Factory wholesale Tungsten Screw And Nut - Special Design for Ground Tzm Molybdenum Plate/cube/block – Forged Tungsten Detail:
It adheres to your tenet “Honest, industrious, enterprising, innovative” to produce new solutions constantly. It regards consumers, success as its own success. Let us develop prosperous future hand in hand for Special Design for Ground Tzm Molybdenum Plate/cube/block, Striving hard to attain continual accomplishment according to good quality, trustworthiness, integrity, and complete understanding of sector dynamics.
It adheres to your tenet “Honest, industrious, enterprising, innovative” to produce new solutions constantly. It regards consumers, success as its own success. Let us develop prosperous future hand in hand for Ground Tzm Molybdenum Plate/cube/block, Molybdenum Plate/cube/block, Tzm Plate/cube/block, Our company is working by the operation principle of “integrity-based, cooperation created, people oriented, win-win cooperation”. We hope we can have a friendly relationship with businessman from all over the world
Chemical composition:
Main and minor components | Min.content(%) | ASTM B386 (361) |
Mo | Balance | balance |
Ti | 0.40-0.55% | 0.40-0.55% |
Zr | 0.06-0.12% | 0.06-0.12% |
Impurities | Max.values (μg/g) | Max.values (μg/g) |
Al | 10 | - |
Cu | 20 | - |
Cr | 20 | - |
Fe | 20 | 100 |
K | 20 | - |
Ni | 10 | 50 |
Si | 20 | 100 |
W | 300 | - |
C | 100-400 | 100-400- |
H | 10 | - |
N | 10 | 20 |
O | 500 | 300 |
Cd | 5 | - |
Hg | 1 | - |
Pb | 5 | - |
Dimensions and tolerances:
Cold rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.30-0.50 | 0.028 | 300 | 1.0 |
Hot rolled sheets | |||
Thickness(mm) | Thickness tolerace(±mm) | Maximal width(mm) | Width tolerace(±mm) |
0.50-0.60 | 0.06 | 850 | 1.6 |
0.60-1.00 | 0.08 | 850 | 1.6 |
1.00-1.50 | 0.13 | 850 | 2.0 |
1.50-2.00 | 0.15 | 850 | 2.0 |
2.00-3.60 | 0.18 | 850 | 2.0 |
3.60-50.0 | 5% | 1000 | 2.0 |
Length tolerance:
The length tolerance for all dimension is maximal +5/-0 mm.
Flatness: max. 4 % (measuring procedure on the basis of ASTM B 386)
Density: ≥ 10.1 g/cm³
Vickers Hardness: 220-320 HV
Tensile Test:
Thickness (mm) | Tensile StrengthMin. (MPa) | 0.2% Yield strengtMin.(MPa) | ElongationMin.(%) |
0.30-1.00 | 700 | 600 | 5 |
1.00-2.50 | 700 | 600 | 10 |
2.50-5.00 | 700 | 600 | 12 |
5.00-20.00 | 650 | 600 | 10 |
20.00-50.00 | 550 | 470 | 5 |
Appearance: The material will be of uniform quality, free from foreign mater, splits and fractures. Bed sheet (not trimmed) may have small edge cracks.
Surface defedts are assessed in the frame of visual inspection.
Surface condition: pickled.
Product detail pictures:
Related Product Guide:
Introducing: The Tudor Black Bay P01 | Pure Molybdenum Strip
The Story of Henry Bessemer | Niobium Carbide Alloy Powder
We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for Factory wholesale Tungsten Screw And Nut - Special Design for Ground Tzm Molybdenum Plate/cube/block – Forged Tungsten , The product will supply to all over the world, such as: Ecuador , Burundi , Provence , During in 11 years, We've participated in more than 20 exhibitions, obtains the highest praise from each customer. Our company has been devoting that "customer first" and committed to helping customers expand their business, so that they become the Big Boss !
By Edwina from Albania - 2017.06.16 18:23
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Tyler Larson from Iraq - 2017.11.11 11:41