Hot Selling for Wolfram Bars Rods Wl20 Lanthanated Tungsten Electrodes Solid Carbide Bar

Short Description:


Product Detail

Product Tags

carry on to improve, to ensure merchandise quality in line with market and shopper standard prerequisites. Our firm has a high quality assurance program are actually established for Hot Selling for Wolfram Bars Rods Wl20 Lanthanated Tungsten Electrodes Solid Carbide Bar, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.
carry on to improve, to ensure merchandise quality in line with market and shopper standard prerequisites. Our firm has a high quality assurance program are actually established for Solid Carbide Tungsten Bar, Wl20 Lanthanated Tungsten Electrodes, Wolfram Bars Rods, You should feel cost-free to send us your specs and we will respond to you asap. We have got a expert engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, be sure to truly feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
Chemical composition:

Main and minor components Min.content(%) ASTM B760
W 99.95 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 15 -
Cu 10 -
Cr 20 -
Fe 30 100
K 10 -
Ni 20 100
Si 20 100
Mo 100 -
C 30 100
H 5 -
N 5 100
O 20 100
Cd 5 -
Hg 1 -
Pb 5 -

Diameter and tolerances:

Diameter (mm) Tolerance
  Straightened Forged Turned Ground
0.50-0.99 - -   ±0.007
1.00-1.99 - -   ±0.010
2.00-2.99 ±2.0 % -   ±0.015
3.00-15.9 - -   ±0.020
16.0-24.9 - ±0.30   ±0.030
25.0-34.9 - ±0.40   ±0.050
35.0-39.9 - ±0.40 ±0.30 ±0.060
40.0-49.9 - ±0.40 ±0.30 ±0.20
50.0-90.0 - ±1.00 ±0.40 -

Length and straightness:

Diameter (mm) Production length (mm) Stiraightness/Meter (mm)
Cleaned Ground/turned
0.50-10.0 ≥500 <2.5 <2.5
10.1-50.0 ≥300 <2.0 <1.5
50.1-90.0 ≥100 <2.0 <1.5

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm) ≥15 15-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.2 ±0.3 ±0.5 ±2.0 ±3.0 ±4.0
Diameter >30.0 mm
Nominal length (mm) ≥30 30-120 120-400 400-1000 1000-2000 >2000
Length tolerance(mm) ±0.5 ±0.8 ±1.2 ±4.0 ±6.0 ±8.0

Density: ≥19.1g/cm³
Nondestructive testing: For diameters>15.00 mm:100% ultrasonic testing. For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm) Hardness (HV 10)
0.50-2.99
3.00-9.99 420-500
10.0-29.9 420-480
30.0-49.9 380-460
≥50 >350

Surface condition:

Diameter (mm) Surface condition
0.50-90.0 Chemical cleaned
≥40.0 Turned Ra ≤3.2μm
0.50-30 Centerless ground Ra≤1.0μm
≥40.0 - Centerless ground Ra≤1.2μm

  • Previous:
  • Next:

  • Write your message here and send it to us