China Manufacturer for Molybdenum Mandrel Bend - OEM Customized Rods Heat Elements Electrodes For Glass Melting Vacuum Furnace Mo Molybdenum – Forged Tungsten Manufacturer and Supplier

Manufacturer for Molybdenum Mandrel Bend - OEM Customized Rods Heat Elements Electrodes For Glass Melting Vacuum Furnace Mo Molybdenum – Forged Tungsten

Short Description:

Product Detail

Product Tags

Feedback (2)

"Quality 1st, Honesty as base, Sincere company and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for Tantalum Plates , Molybdenum Plate And Sheet , Tungsten Wire Electrode , We have been in operation for more than 10 years. We are dedicated to quality products and consumer support. We invite you to visit our company for a personalized tour and advanced business guidance.

Manufacturer for Molybdenum Mandrel Bend - OEM Customized Rods Heat Elements Electrodes For Glass Melting Vacuum Furnace Mo Molybdenum – Forged Tungsten Detail:

Dedicated to strict quality management and considerate client company, our experienced team associates are generally available to discuss your demands and make certain full purchaser pleasure for OEM Customized Rods Heat Elements Electrodes For Glass Melting Vacuum Furnace Mo Molybdenum, Inside our initiatives, we already have a lot of shops in China and our solutions have won praise from buyers all over the world. Welcome new and outdated buyers to contact us to the long run long lasting business relationships.
Dedicated to strict quality management and considerate client company, our experienced team associates are generally available to discuss your demands and make certain full purchaser pleasure for Mo 99.95%, Molybdenum Electrode, Insisting on the high quality generation line management and customers qualified assistance, we now have designed our resolution to offer our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We’re ready to face the worries and make the improve to understand all the possibilities in international trade.
Molybdenum rods Chemical composition:

Main and minor components	Min.content(%)	ASTM B386 (361)
Mo	99.95	balance
Impurities	Max.values (μg/g)	Max.values (μg/g)
Al	10	-
Cu	20	-
Cr	20	-
Fe	20	100
K	20	-
Ni	10	50
Si	20	100
W	300	-
C	30	100
H	10	20
N	10	70
O	40	-
Cd	5	-
Hg	1	-
Pb	5	-

Dimensions and tolerances:

Diameter (mm)	Diameter tolerance (mm)
Ground
0.50-0.99	±0.007
1.00-1.99	±0.010
1.00-2.99	±0.015
3.00-15.9	±0.020
16.0-24.9	±0.030
25.0-34.9	±0.050
35.0-3939	±0.060
≥40.0	±0.20
Cleaned
0.50-4.0	±2.0%
4.10-10.0	±1.5%
15.0-50.0	±0.30
51.0-75.0	±0.40
75.1-120.0	±1.00
121.0-165.0	±1.50
Turned
40.0-49.9	±0.30
50.0-165.0	±0.40

Length and straightness:

Diameter (mm)	Production length (mm)	Stiraightness/Meter (mm)
Diameter (mm)	Production length (mm)	Cleaned	Ground/turned
0.50-0.99	＞500	＜2.5	＜2.5
1.00-9.90	＞300	＜2.0	＜1.5
10.0-165.0	＞100	＜1.5	＜1.0

Length tolerance:

Diameter 0.50-30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±0.2	±0.3	±0.5	±0.8	±1.2	±2.0
Diameter ＞30.0 mm
Nominal length (mm)	6-30	30-120	120-400	400-1000	1000-2000	＞2000
Length tolerance(mm)	±1.0	±1.5	±2.5	±4.0	±6.0	±8.0

Density:
1. 00.50-40.0 mm ≥10.15g/cm³
2. 40.1-80.0 mm ≥10.10g/cm³
3. 80.1-120.0 mm ≥10.00g/cm³
4. 120.1-165.0 mm ≥9.90g/cm³
Nondestructive testing: For diameters＞15.00 mm:100% ultrasonic testing; For diameters of 0.50-50.0mm:Eddy curent tests on rods with ground surface.

Diameter(mm)	Tensile strength(MPa)	0.2% Yield Strength(MPa)	Elongation(%)	Hardness(HV 10)
0.50-3.18	≥585	≥450	≥15
3.18-10.30	≥515	≥380	≥15
10.32-22.20	≥620	≥515	≥18	230-280
22.20-28.60	≥585	≥480	≥15	225-270
28.60-47.60	≥515	≥450	≥10	215-260
47.60-73.00	≥480	≥415	≥10	210-250
73.00-88.90	≥450	≥380	≥10	205-240
89.00-120.9	≥450	≥380	≥5	200-240
121.0-164.9	≥450	≥380	≥5	180-240
165.0	≥450	≥380	≥-	180-240

Surface condition:

Surface：	Cleaned	Ground	Turned
	φ0.50-165mm	φ0.50-50.00mm	φ≥40.00mm
Roughness	Diameter (mm)	Ra (μm) Ground	Ra (μm) Turned
	≤2.50	≤0.80	-
	2.5-50.0	≤1.00	-
	≥40.0	-	≤3.2

Product detail pictures:

Related Product Guide:
Outlook for Semi-Fabricated Copper Production, Export | Tungsten Boats For Heating
Nanodomained Nickel Unite Nanocrystal Strength with Coarse-Grain Ductility | Niobium Carbide Alloy Powder

We have been convinced that with joint attempts, the business enterprise between us will bring us mutual benefits. We could guarantee you product or service good quality and aggressive value for Manufacturer for Molybdenum Mandrel Bend - OEM Customized Rods Heat Elements Electrodes For Glass Melting Vacuum Furnace Mo Molybdenum – Forged Tungsten , The product will supply to all over the world, such as: kazan , London , Casablanca , Our tenet is "integrity first, quality best". We have confidence in providing you with excellent service and ideal products. We sincerely hope we can establish win-win business cooperation with you in the future!

Cr Sputtering Target