OEM Supply 3mm Thickness Tungsten Plate/sheet/foil Kg In

Short Description:


Product Detail

Product Tags

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of OEM Supply 3mm Thickness Tungsten Plate/sheet/foil Kg In, We just not only provide the high quality to our customers, but more even important is our best service and the competitive price.
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Tungsten Kg, Our company always concentrate on the development of the international market. We’ve a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
Chemical composition:

Main and minor components Min.content(%) ASTM B760
W 99.97 balance
Impurities Max.values (μg/g) Max.values (μg/g)
Al 15 -
Cu 10 -
Cr 20 -
Fe 30 100
K 10 -
Ni 20 100
Si 20 100
Mo 300 -
C 30 100
H 5 -
N 5 100
O 20 100
Cd 5 -
Hg 1 -
Pb 5 -

Dimensions and tolerances:
Cold rolled sheets

Thickness(mm) Thickness tolerance(±mm)  
Width≤200mm Max.width 510mm Width tolerance(±mm)
0.025 0.003    
0.025-0.03 0.004   0.5
0.03-0.04 0.005   0.5
0.04-0.05 0.006   0.5
0.05-0.06 0.008   0.5
0.06-0.08 0.010   0.5
0.08-0.10 0.015   0.5
0.10-0.15 0.025 0.045 0.5
0.15-0.30 0.035 0.060 1.0
0.30-0.40 0.05 0.085 1.6
0.40-0.50 0.06 0.110 1.6

Hot rooled sheets

Thickness(mm) Thickness tolerance(±mm)  
Width≤510mm Max.width 1200(mm) Width tolerance(±mm)
0.05-0.60 0.110   1.6
0.60-0.80 0.140   2.0
0.08-1.00 0.200   2.0
1.00-2.00 0.250   2.0
2.00-8.00 0.300   2.0
8.0-20.00 5% 5% 2.0

Length tolerance: the length tolerance for all dimensions is maximal +5/-0 mm.
Flatness: max. 4% (measuring procedure on the basis of ASTM B760)
Density: thickness<10.00mm density>19.2g/cm³
thicknes(10.00-20.00mm)density>19.1g/cm³
Vickers hardness:
≤0.10 mm ≥550 HV
0.10-0.05 mm ≥500 HV
0.50-1.50mm ≥470 HV
1.50-10.00mm ≥450 HV
10.00-20.00mm ≥420 HV
Appearance: The material will be of uniform quality, free from foreign matter, splits and fractures.
Bed sheet (not trimmed) may have small edge cracks.
Surface quality:
Cold rolled ≤ 0.30mm bright
Cold rolled 0.3-0.5 mm pickled
Hot rolled ≥0.50 mm pickled


  • Previous:
  • Next:

  • Write your message here and send it to us