PriceList for Pure Niobium Rod Bar - Molybdenum Copper Alloy – Forged Tungsten
PriceList for Pure Niobium Rod Bar - Molybdenum Copper Alloy – Forged Tungsten Detail:
Chemical composition:
Main and minor components | Min.content(%) |
Mo | 67-73 |
Cu | 27-33 |
Impurities | Max.values (μg/g) |
Al | 10 |
Cr | 20 |
Fe | 20 |
K | 20 |
Ni | 10 |
Si | 30 |
W | 300 |
C | 100 |
H | 10 |
N | 10 |
O | 1000 |
Sn | 10 |
Sb | 20 |
Sr | 10 |
V | 10 |
Cd | 5 |
Hg | 1 |
Pb | 5 |
Thickness and width tolerances:
Tolerances with width | Width tolerance | |
Thickness(mm) | Max. 400 mm ± mm or % of the thickness | [± mm] |
0.20-0.30 | 0.020 | 0.5 |
0.30-0.40 | 0.030 | 0.5 |
0.40-0.60 | 0.035 | 1.6 |
0.60-1.00 | 0.040 | 1.6 |
1.00-1.50 | 4% | 1.6 |
1.50-2.00 | 4% | 1.6 |
Lengh tolerance
The length tolerance for all dimensions is maximal +5/-0 mm.
Flatness | max. 4% (measuring procedure on the basis of ASTM B386) |
Density | ≥ 9,7 g/cm³ |
Thermal expansion coefficient | ≤ 9,5 [10-6 × K-1 ] |
Thermal conductivity [λ at 20°C] | 150 – 190 [W/mK] |
Specific electrical resistance [ρ at 20°C] | ≤ 0,040 [µΩm] |
[E-Modulus at 20°C] | 215 – 240 GPa |
Vickers hardness | ≥ 180 HV |
Appearance | The material will be of uniform quality, free from foreign matter, splits and fractures. Bed sheets (not trimmed) may have small edge cracks. |
Surface roughness | Cold-rolled, ground:Ra≤1.5µm |
Cold-rolled: Ra≤1.5µm |
Product detail pictures:
Related Product Guide:
Berkeley Talks transcript: Berkeley Law Professor Catherine Fisk on reimagining labor law | Tungsten Boats For Heating
Nanodomained Nickel Unite Nanocrystal Strength with Coarse-Grain Ductility | Niobium Carbide Alloy Powder
We constantly function like a tangible group to ensure that we can give you the very best high-quality and also the very best cost for PriceList for Pure Niobium Rod Bar - Molybdenum Copper Alloy – Forged Tungsten , The product will supply to all over the world, such as: Greek , UAE , Bahrain , Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We've got tightened inspection for quality of product.
By Kimberley from Buenos Aires - 2017.11.29 11:09
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Edith from Peru - 2018.06.12 16:22
Write your message here and send it to us